Position; Pc Screen Adjustment; Resolution Select; Auto Adjustment - Samsung DE40A User Manual

4
Screen Adjustment
3
Press the
4
Press the [
5
Select Close
Reset.
To use the

Position

(1080i/1080p) or Custom, follow these steps.
1
Press the
2
Press the [
3
Press the
4
Press the [
5
Select Close
If you want to reset the picture to its original position, select
picture will be set to its default position.

4.3.3 PC Screen Adjustment

Available in
Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use
the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the
noise has been reduced, re-adjust the picture so that it is aligned with the center of screen.
Position: To adjust the PC's screen position if it is not centered or does not fit the product screen. Press
the or button to adjust the Vertical Position. Press the
Position.
Image Reset: Resets the image to the default settings.

4.3.4 Resolution Select

If the picture is not normal even when the resolution of the graphics card is one of the following, you can
optimize the picture quality by selecting the same resolution for the product as the PC using this menu.
Available resolutions:
The Resolution Select
4.4

Auto Adjustment

O
m
MENU
or button to move the picture up or down.
] button.
by pressing the and
function after selecting
button to select Position.
] button.
/ / / button to move the picture.
] button.
by pressing the and
PC mode only.
Off / 1024 x 768 / 1280 x 768
option is only enabled when the input source is PC.
Picture Auto Adjustment
buttons sequentially. To reset the picture position, press
Screen Fit in HDMI (1080i/1080p) or Component
buttons sequentially.
Reset
or button to adjust the Horizontal
/ 1360 x 768 / 1366 x 768
ENTER
in the Position screen. The
103
4 Screen Adjustment