Magicinfo Lite Settings; Server; Storage; Safely Remove Usb - Samsung DE40A Service Manual

2. Product Specifications

MagicInfo Lite Settings

„

1. Server

Configuring the MagicInfo Lite server IP
-
• Enter the server IP address and port number. (Use 7001 as the port number. If unable to connect to the server
using port number 7001, check with your server administrator to find the correct port number and then change the
port number.)
FTP Mode
-
• Configure the FTP operating mode. (Active or Passive)
Default Storage
-
• Specify the default memory to save schedules or content sent from the server to.
• When the default storage space is set to USB, a schedule will not run if a USB device is not connected.
• Send a notification message to the server when internal memory is used up.

2. Storage

Internal Memory: Display the space currently being used, or delete all content.
-
USB: Display the space currently being used.
-
3. Slideshow
Image Viewer Time: Specify the length of time each image is displayed for a local schedule or slideshow.
-
PPT Viewer Time: Specify the length of time each document page is displayed for a local schedule or slideshow.
-
Image Effect: Configure the image transition effects.
-
• Fade1, Fade2, Blind, Spiral, Checker, Linear, Linear, Wipe, Random, None
4. Schedule Name
Select a schedule title format when creating a local schedule:
-
• YYYYMMDD, YYYYDDMM or DDMMYYYY

5. Safely Remove USB

You can safely remove USB memory.
-
6. Information
Device Name: Display the name of a device recognized by the server.
-
Serial Number: Display the original identification number of a device.
-
Software Version: Display the software version of a device.
-
2-14