Samsung DE40A User Manual page 195

12
Specifications
Environme
ntal
considerat
ions
Power Supply : This product uses 100 to 240V. Refer to the label at the back of the product as the
standard voltage can vary in different countries.
Plug-and-Play : This monitor can be installed and used with any Plug-and-Play compatible systems.
Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor
installation takes place automatically. However, you can customize the installation settings if desired.
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may
appear brighter or darker on the panel. This does not affect product performance.
Class A (Information Communication equipment for industrial use) Attention dealers and users. This
device is registered for EMC requirements for industrial use (Class A) and can be used in areas other
than general households.
[Recommendation] - EU Only
Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.
The official Declaration of Conformity may be found at http://www.samsung.com, go to Support >

Search Product Support and enter the model name.
This equipment may be operated in all EU countries.

(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
Operating
Storage
Temperature : 32 ˚F ~ 104 ˚F (0 ˚C ~ 40 ˚C)
Humidity : 10 % ~ 80 %, non-condensing
Temperature : -4 ˚F ~ 140 ˚F (-20 ˚C ~ 60 ˚C)
Humidity : 5 % ~ 95 %, non-condensing
195
12 Specifications