Samsung DE40A User Manual page 105

4
Screen Adjustment
3D Mode
Off
3D 3D
3D
Side by Side
Top & Bottom
Line by Line
Vertical Stripe
Checker Board
Frame
Sequential
Some file format may not supported the "2D

"Side by Side" and "Top & Bottom" are available when the resolution is 720p, 1080i and

1080p in HDMI and USB mode or when set to PC and the PC is connected through an HDMI
/ DVI cable.
"Vertical Stripe", "Line by Line" and "Checker Board" are available when the resolution is set

to PC and the PC is connected through an HDMI / DVI cable.
"Frame Sequential" displays the frequency (60Hz only) when the resolution is set to PC.

3D Effect: Adjust 3D effects like perspective and depth for your preferred 3D viewing experience.

Auto: Automatically adjust the perspective and depth settings in accordance with the 3D input

source.
Manual: Manually adjust the perspective and depth settings.

L/R Change (L/R Image

3D 2D (Off

This function is deactivated when
3D Auto View (Off

"Side by Side" format HDMI signal with one of the resolutions below is automatically switched to 3D.
If you set 3D Auto View
appears when the product receives a 3D signal.
If a 3D failure occurs due to a 3D information error, set

select a
3D Optimize

Support resolution (16:9 only)
Turns the 3D function off.
2D Changes a 3D image to 2D.
Displays two images next to each other.
Displays one image above another.
Displays the images for the left and right eye alternately in
rows.
Displays the images for the left and right eye alternately in
columns.
Displays the images for the left and right eye alternately in
pixels.
Displays the images for the left and right eye alternately in
frames.
/ R/L Image): Swap the left and right pictures.
/ On): Displays the image for the left eye only.
3D Mode
/ Message Notice (or
to Message Notice
3D Mode using the corresponding menu.
(or 3D Optimisation): The overall adjustment of 3D effect.
Operation
3D."
set to "2D 3D" or Off.
Message Alert) / On): If 3D Auto View
(or Message Alert), a pop up message window
3D Auto View
is set to On, a
to Off and manually
105
4 Screen Adjustment