System; Multi Control; Configuring Settings For Multi Control - Samsung DE40A User Manual

8

System

8.1

Multi Control

O
m
MENU
Assign an individual ID to your product.

8.1.1 Configuring settings for Multi Control

MDC Connection

Select a method to connect to MDC to receive the MDC signal.
RS232C MDC

Communicate with MDC via the RS232C-stereo cable.
RJ45 MDC

Communicate with MDC via the RJ45 cable.
ID Setup

Assign an ID to a set. (Range: 0~99)
Press or
ID Input

Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
Refer to page 65 for details about the
System Multi Control
to select a number, and press [
ENTER
].
MDC menu.
141
8 System