Download  Print this page

Advertisement

User Manual

ME40A ME46A ME55A
DE40A DE46A DE55A
UE46A UE55A
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00098B-06
Downloaded From TV-Manual.com Manuals

Advertisement

Table of Contents

   Also See for Samsung ME40A

   Related Manuals for Samsung ME40A

   Summary of Contents for Samsung ME40A

  • Page 1: User Manual

    User Manual ME40A ME46A ME55A DE40A DE46A DE55A UE46A UE55A The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00098B-06 Downloaded From TV-Manual.com Manuals...
  • Page 2: Before Using The Product

    2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
  • Page 3 Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. The following images are for reference only. Real-life situations may differ from what is shown in the images.
  • Page 4: Safety Precautions

    Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.
  • Page 5: Electricity And Safety

    Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.
  • Page 6: Installation

    Do not disconnect the power cord while the product is being used. The product may become damaged by an electric shock.  Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. A fire or electric shock may result.
  • Page 7 Before Using the Product Keep the plastic packaging out of the reach of children. Children may suffocate.  Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) The product may fall and become damaged and/or cause an injury. ...
  • Page 8 SAMSUNG time) may seriously affect its performance. Be sure to consult Samsung Customer Service Center if you want to install  the product at such a place. Operation Warning There is a high voltage inside the product.
  • Page 9 Before Using the Product During a lightning or thunderstorm, remove the power cord and do not touch the antenna cable. A fire or electric shock may result.  Do not drop objects on the product or apply impact. A fire or electric shock may result. ...
  • Page 10 Be sure to power off the product and disconnect the power cord when water  or other foreign substances have entered the product. Then contact Samsung Customer Service Center. Product failure, an electric shock or fire may result.  Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
  • Page 11 Before Using the Product Do not use humidifiers or stoves around the product. A fire or electric shock may result.  Rest your eyes for more than 5 minutes for every 1 hour of product use. Eye fatigue will be relieved. ...
  • Page 12: Table Of Contents

    Table Of Contents BEFORE USING THE Copyright PRODUCT Cleaning Storage Safety Precautions Symbols Electricity and Safety Installation Operation PREPARATIONS Checking the Contents Removing the Packaging Checking the Components Parts Control Panel Reverse Side Anti-theft Lock Remote Control Before Installing the Product (Installation Guide) Tilting Angle and Rotation Ventilation...
  • Page 13 Table Of Contents Connecting and Using a PC Connecting to a PC Changing the Resolution Connecting to a Video Device Connection Using the AV Cable Connection Using the component Cable Connection Using an HDMI-DVI Cable Connection Using an HDMI Cable Connecting an External Monitor Connecting to an Audio System Changing the Input source...
  • Page 14 Table Of Contents What is MDC? Connecting to MDC Connection Management Auto Set ID Cloning Command Retry Getting Started with MDC Main Screen Layout Menus Screen Adjustment Sound Adjustment System Setup Tool Settings Other Functions Troubleshooting Guide SCREEN ADJUSTMENT Picture Mode If the input source is PC, DVI or DP If the input source is AV, Component, HDMI Backlight / Contrast / Brightness /...
  • Page 15 Table Of Contents Advanced Settings Black Tone Dynamic Contrast Shadow Detail Gamma Expert Pattern RGB Only Mode Colo(u)r Space White Balance 10p White Balance (Off / On) Flesh Tone Edge Enhancement (Off / On) Motion Lighting (Off / On) LED Motion Plus (Off / On) Picture Options Colo(u)r Tone Colo(u)r Temp.
  • Page 16 Table Of Contents Videos Playing a Video Photos Viewing a Photo (or Slide Show) Music Playing Music Videos / Photos / Music - Additional Functions Sorting the file lists Videos/Photos/Music Play Option menu Source Source Edit Name Information Refresh AllShare NETWORK Network Settings Connecting to a Wired Network...
  • Page 17 Table Of Contents Time Clock set Sleep Timer On Timer Off Timer Holiday Management Menu Language Eco Solution Energy Saving Eco Sensor (Off / On) No Signal Power Off Auto Power Off (Off / On) Security Safety Lock (Off / On) Button Lock (Off / On) Change PIN Auto Protection Time...
  • Page 18 DivX® Video On Demand Network Remote Control Reset System Reset All SUPPORT Software Upgrade By USB Alternative Software Contact Samsung MAGICINFO LITE File Formats Compatible with MagicInfo Lite Player Video / Audio Network Schedule Connecting to a server MagicInfo Lite Settings...
  • Page 19 Viewing the details of the content that is running Changing the settings for the content that is running TROUBLESHOOTING Requirements Before Contacting Samsung Customer Service Center GUIDE Testing the Product Checking the Resolution and Frequency Check the followings. Q & A...
  • Page 20 Table Of Contents APPENDIX Contact SAMSUNG WORLDWIDE Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality Prevention of Afterimage Burn-in Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only Correct disposal of batteries in this...
  • Page 21: Preparations

    Preparations Checking the Contents 1.1.1 Removing the Packaging Remove the black locking device at the bottom of the box. Using the grooves in the box, lift and remove the top of the box. Check the components and remove the styrofoam and plastic bag. The appearance of actual components may differ from the image shown.
  • Page 22: Checking The Components

    Preparations 1.1.2 Checking the Components Contact the vendor where you purchased the product if any components are missing.  The appearance of the components and items sold separately may differ from the image shown.  Components Components may differ in different locations. Quick setup guide Warranty card User manual...
  • Page 23 Preparations Items sold separately The stand is not supplied.  The following items can be purchased at your nearest retailer.  Wall-mount KIT RS232C stereo cable DVI cable HDMI-DVI Cable HDMI cable DP cable RCA stereo cable Video cable LAN cable Stereo cable Component cable RCA cable...
  • Page 24: Parts

    Preparations Parts 1.2.1 Control Panel The color and shape of parts may differ from what is shown. Specifications are subject to change  without notice to improve quality. Keep the area between the remote sensor and remote control obstacle-free.  SOURCE MENU POWER...
  • Page 25: Reverse Side

    Preparations Sensor Description Use this button for turning the Display on and off. Receives signals from the remote To control the remote control in front of the product, lower the remote control sensor in the direction of the arrow (indicated in the zoomed-in Remote sensor image on the previous page).
  • Page 26 Preparations Port Description [RGB / DVI / DP / HDMI Receives sound from a PC via an audio cable. AUDIO IN] Connect to a USB memory device. [USB] [AV IN / COMPONENT IN] Connects to a source device using the AV/component adapter. [DP IN] Connects to a PC using a DP cable.
  • Page 27: Anti-theft Lock

    Preparations Assembling the Holder-Wire stand * Stand : Sold separately 1.2.3 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places.  The locking device shape and locking method depend on the manufacturer. Refer to the user ...
  • Page 28: Remote Control

    Preparations 1.2.4 Remote Control Using other display devices in the same space as the remote control of this product can cause the  other display devices to be inadvertently controlled. Remote control button functions may differ for different products.  This is a special remote control for the visually impaired persons and has Braille points on the ...
  • Page 29 Preparations Adjusting the OSD with the Remote Control Open the OSD menu. MENU Select from Picture, Sound, Media, Network, System Support in the displayed OSD menu screen. Change settings as desired. Finish setting. Close the onscreen display (OSD) menu. To place batteries in the remote control Downloaded From TV-Manual.com Manuals 1 Preparations...
  • Page 30 Preparations Remote Control Reception Range Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the left and right. Store used batteries out of reach of children and recycle.  Do not use a new and used battery together.
  • Page 31: Before Installing The Product (installation Guide)

    Make sure to install the specified wall mount.  1.3.1 Tilting Angle and Rotation Contact Samsung Customer Service Center for further details. 15 Û The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
  • Page 32: Ventilation

    Preparations 1.3.2 Ventilation 1. Installation on a Perpendicular Wall Minimum 40 mm Ambient temperature: Under 35 C When installing the product on a perpendicular wall, allow  at least 40mm of space between the product and wall surface for ventilation and ensure that the ambient temperature is kept below 35 C.
  • Page 33 Preparations 2. Installation on an Indented Wall Contact Samsung Customer Service Center for further details. Plane view Minimum 40 mm Minimum 70 mm Minimum 50 mm Minimum 50 mm Ambient temperature: Under 35 C Figure 1.2 Side view When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 C.
  • Page 34: Dimensions

    Preparations 1.3.3 Dimensions (Unit: mm) SET - Dimension (W x D x H) [mm] Without STAND Model name ME40A / DE40A 920.0 885.6 498.2 534.5 29.9 ME46A / DE46A 1055.2 1018.0 572.6 610.8 29.9 ME55A / DE55A 1246.4 1209.6 680.4 718.2...
  • Page 35: Installing The Wall Mount

    We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
  • Page 36 Do not fasten the screws too firmly. This may damage the  product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury ...
  • Page 37: Remote Control (rs232c)

    Preparations Remote Control (RS232C) 1.5.1 Cable Connection Interface RS232C (9 pins) TxD (No. 2), RxD (No. 3), GND (No. 5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15m (only shielded type) Pin assignment ...
  • Page 38 Preparations RS232C cable  Connector: 9-Pin D-Sub to Stereo Cable -P2- STEREO PLUG (3.5ø) -P1- -P1- -P1- -P2- -P2- --------> STEREO Female <-------- PLUG (3.5ø) --------- Connection  RS232C RS232C RS232C RS232C Downloaded From TV-Manual.com Manuals 1 Preparations...
  • Page 39: Control Codes

    Preparations 1.5.2 Control Codes Viewing control state (Get control command) Header Command Data length Checksum Command 0xAA type Controlling (Set control command) Header Command Data length Data Checksum Command 0xAA Value type Command Command type Command Value range Power control 0x11 Volume control 0x12...
  • Page 40 Preparations To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as  "0xFE" and transmit commands. Commands will be executed by each device but ACK will not respond. Power control Function  A product can be powered on and off using a PC. Viewing power state (Get Power ON / OFF Status) ...
  • Page 41 Preparations Volume control Function  The volume of a product can be adjusted using a PC. Viewing volume state (Get Volume Status)  Header Command Data length Checksum 0xAA 0x12 Setting the volume (Set Volume)  Header Command Data length Data Checksum 0xAA...
  • Page 42 Preparations Input source control Function  The input source of a product can be changed using a PC. Viewing input source state (Get Input Source Status)  Header Command Data length Checksum 0xAA 0x14 Setting the input source (Set Input Source) ...
  • Page 43 Preparations Comma Header Data length Ack/Nak r-CMD Val1 Checksu "Input 0xAA 0xFF ‘A’ 0x14 Source" "Input Source": An input source code to be set on a product  Comma Header Data length Ack/Nak r-CMD Val1 Checksu 0xAA 0xFF ‘N’ 0x14 "ERR"...
  • Page 44 Preparations Screen Function  The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled. This control can only be used on models that include a product. Viewing screen status (Get Screen Mode Status) ...
  • Page 45 Preparations Screen size control Function  The screen size of a product can be changed using a PC. Viewing the screen size (Get Screen Size Status)  Header Command Data length Checksum 0xAA 0x19  Comma Header Data length Ack/Nak r-CMD Val1 Checksu...
  • Page 46 Preparations PIP On/Off control Function  The PIP mode of a product can be turned on or off using a PC. Only available on models that have the PIP function  The mode cannot be controlled if Video Wall is set to On. ...
  • Page 47 Preparations Auto adjustment control (PC and BNC only) Function  Automatically adjust the PC system screen using a PC. Viewing auto adjustment state (Get Auto Adjustment Status)  Setting auto adjustment (Set Auto Adjustment)  Header Command Data length Data Checksum "Auto 0xAA...
  • Page 48 Preparations Video Wall Mode Control Function  Video Wall Mode can be activated on a product using a PC. This control is only available on a product whose Video Wall is enabled. This function is not available in MagicInfo. Viewing video wall mode (Get Video Wall Mode) ...
  • Page 49 Preparations Safety Lock Function  PC can be used to turn the Safety Lock function on or off on a product. This control is available regardless of whether or not the power is turned on. Viewing the safety lock state (Get Safety Lock Status) ...
  • Page 50: Connecting And Usinga Source Device

    Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. Audio 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it.
  • Page 51: Connecting And Using A Pc

    Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC A PC can be connected to the product in a variety of ways.  Select a connection method suitable for your PC. After connecting the PC, connect the power cable. ...
  • Page 52 Connecting and Using a Source Device Connection Using an HDMI-DVI Cable HDMI IN RGB / DVI / DP / HDMI AUDIO IN When you connect a PC to the product using an HDMI-DVI cable, set Edit Name DVI PC to access video and audio content stored on the PC.
  • Page 53 Connecting and Using a Source Device Connection Using an DP Cable DP IN Downloaded From TV-Manual.com Manuals 2 Connecting and Using a Source Device...
  • Page 54: Changing The Resolution

    Connecting and Using a Source Device 2.2.2 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display...
  • Page 55 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution, and change the resolution. **** **** Downloaded From TV-Manual.com Manuals 2 Connecting and Using a Source Device...
  • Page 56: Connecting To A Video Device

    Connecting and Using a Source Device Connecting to a Video Device You can connect a video device to the product using a cable.  Connecting parts may differ in different products.  Press the SOURCE button on the remote control to change the source. ...
  • Page 57: Connection Using An Hdmi-dvi Cable

    Connecting and Using a Source Device 2.3.3 Connection Using an HDMI-DVI Cable HDMI RGB / DVI / DP / HDMI AUDIO IN Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. ...
  • Page 58: Connection Using An Hdmi Cable

    Connecting and Using a Source Device 2.3.4 Connection Using an HDMI Cable HDMI IN Using an HDMI cable or HDMI to DVI Cable (up to 1080p) For better picture and audio quality, connect to a digital device using an HDMI cable. ...
  • Page 59: Connecting An External Monitor

    Connecting and Using a Source Device 2.3.5 Connecting an External Monitor DVI OUT (LOOPOUT) AUDIO OUT The following images are for reference only. Real-life situations may differ from what is shown in the  images. The Loopout function can be used to duplicate the screen of the primary display. Connect [DVI ...
  • Page 60: Changing The Input Source

    Connecting and Using a Source Device Changing the Input source 2.4.1 Source MENU Media Source ENTER Source allows you to select a variety of sources and change source device names. Source You can display the screen of a source device connected to the product. Select a source from source list to display the screen of the selected source.
  • Page 61: Connecting The Network Box

    Connecting and Using a Source Device Connecting the network box For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase. 2.5.1 MagicInfo To use MagicInfo, a network box (sold separately) must be connected to the product. To change the MagicInfo settings, run "MagicinfoSetupWizard"...
  • Page 62 Connecting and Using a Source Device Select the default application you want to run when MagicInfo starts. MagicInfo Setup Wizard - v.1.12 Select Application - step 1 MagicInfo Pro (LAN, WAN based version) MagicInfo-i Premium (Web-based version) Select Later < Back(B) Next(N) >...
  • Page 63 Connecting and Using a Source Device Select a language. (The default language is English.) MagicInfo Setup Wizard - v.1.12 Select Language -step 3 Select the language you want to install on the system for menus and dialogs. Current Language Engilsh Chinese [Traditional] German English...
  • Page 64 Connecting and Using a Source Device Double-check the settings you have just configured. MagicInfo Setup Wizard - v.1.12 Setup Information 1. Application : MagicInfo Pro [LAN,WAN based version\ 2. Internet Protocol [TCP/IP] IP : 192.168.0.102 3. Language : English 4. Screen Type : Landscape Do not show again <...
  • Page 65: Using Mdc

    Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. Configuring Settings for Multi Control MENU System Multi Control ENTER Assign an individual ID to your product. 3.1.1 Configuring settings for Multi Control MDC Connection ...
  • Page 66: Communicate With Lan Cable

    Using MDC Communicate with LAN cable RJ45 Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB. Communicate with Stereo cable via the LAN cable RS232C OUT RJ45 Multiple products can be connected using the [RS232C IN / OUT] port on the product. Downloaded From TV-Manual.com Manuals 3 Using MDC...
  • Page 67: Mdc Program Installation/uninstallation

    Using MDC MDC Program Installation/Uninstallation 3.5.1 Installation Insert the installation CD into the CD-ROM drive. Click the MDC Unified installation program. If a software installation window is not displayed on the main screen, install with the "MDC Unified" execution file in the MDC folder on the CD. Click "Next"...
  • Page 68: What Is Mdc

    Using MDC What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. 3.6.1 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC.
  • Page 69: Connection Management

    Using MDC 3.6.2 Connection Management Connection management includes the Connection list and Connection list modification options. Connection list – Connection list shows the details of the connections such as connection setting (IP/ COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion.
  • Page 70: Auto Set Id

    Using MDC 3.6.3 Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisy- chain running from 1 to 99, and then finally to Set ID 0.
  • Page 71: Cloning

    Using MDC 3.6.4 Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window.
  • Page 72: Command Retry

    Using MDC 3.6.5 Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window.
  • Page 73: Getting Started With Mdc

    Using MDC 3.6.6 Getting Started with MDC To start the program, click Start Programs Samsung MDC Unified. Click Add to add a display device. If the connection is established via RS232C, go to Serial and specify the COM Port. ...
  • Page 74 Using MDC If the connection is established via Ethernet, enter the IP that was entered for the display  device. Downloaded From TV-Manual.com Manuals 3 Using MDC...
  • Page 75: Main Screen Layout

    Using MDC 3.6.7 Main Screen Layout Change the status of a display device or the properties of the program. Menu Bar View a list of connected display devices or device groups. Device Category View a list of schedules for display devices. Schedule Category Select the display device you want to adjust.
  • Page 76: Menus

    Using MDC 3.6.8 Menus You can power on or off a selected device or change the input source or volume of the device. Choose display devices from the list of sets, and select the Home tab. Home Select an item and change the corresponding setting. Power On: Power on a selected display.
  • Page 77 Using MDC This menu shows a list of display devices which have following errors - fan error, temperature  error, brightness sensor error, or lamp error. Select a display device from the list. The Repair button will be enabled. Click the refresh button to refresh the error status of the display device.
  • Page 78: Screen Adjustment

    Using MDC 3.6.9 Screen Adjustment The screen settings (contrast, brightness, etc.) can be adjusted. Choose display devices from the list of sets, and select the Picture tab. Custom Select an item and change the corresponding screen setting. Color and Tint are not available if the input source is PC. ...
  • Page 79 Using MDC Blue Customize the intensity of blue color for the selected display device.  Downloaded From TV-Manual.com Manuals 3 Using MDC...
  • Page 80 Using MDC Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the gamma value for the selected display. Auto Motion Plus This option is used to view dynamic images. Off: Disable the Auto Motion Plus function. ...
  • Page 81 Using MDC Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode that does not support detailed configuration. The -/+ buttons can be used to adjust Zoom. The screen can be relocated using the up/down/left/right buttons.
  • Page 82: Sound Adjustment

    Using MDC 3.6.10 Sound Adjustment You can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for the selected display.
  • Page 83: System Setup

    Using MDC 3.6.11 System Setup Choose display devices from the list of sets, and select the System tab. Video Wall The Video Wall function can be used to display part of a whole picture or repeat the same picture on each of connected multiple display devices.
  • Page 84 Using MDC Select the number of horizontal display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. Select the number of vertical display devices. A maximum of 15 displays can be arranged in a row.
  • Page 85 Using MDC Basic information required to adjust PIP will appear in the menu screen. PIP will be disabled when Video Wall is ON.  Note that Picture Size is disabled when PIP is ON.  PIP Size View the PIP Size of the current display. PIP Source Select a PIP input source.
  • Page 86 Using MDC General User Auto Color Automatically adjust the screen colors. Available only in PC mode. Auto Power Set the product to automatically power on. Standby Control Set the standby mode to activate if an input source is not detected. Fan &...
  • Page 87 Using MDC Security Safety Lock Lock the on-screen menus. To unlock the menus, set Safety Lock to Off. Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off. OSD Display Source OSD Select whether to display a message when the Source is changed.
  • Page 88 Using MDC Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Time: Set the time to power on the selected display device. ...
  • Page 89 Using MDC Once: Activate the timer only one time.  EveryDay: Activate the timer every day.  Mon~Fri: Activate the timer from Monday through Friday.  Mon~Sat: Activate the timer on Saturdays and Sundays.  Manual: Customize days of the week. ...
  • Page 90 Using MDC Screen Burn Protection Pixel Shift Move the screen slightly at specified time intervals to prevent screen burn-in. Screen Saver This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Interval: Set the interval to activate the Screen Saver.
  • Page 91: Tool Settings

    Using MDC The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time.
  • Page 92 Using MDC Reset Reset Picture Reset the screen settings. Reset Sound Reset the sound settings. Reset System Reset the system settings. Reset All Reset the screen, sound and system settings at the same time. Edit Column Select the items you want to display in the list of sets. Information View the program information.
  • Page 93: Other Functions

    Using MDC 3.6.13 Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to customize the size of the program window. Downloaded From TV-Manual.com Manuals 3 Using MDC...
  • Page 94 Using MDC Group Management Creating Groups Create groups and manage the list of sets on a group basis. Duplicate group names cannot be used. Right-click and select Group>Edit in the display device list section on the left side of the program window.
  • Page 95 Using MDC The Add on the same level button is enabled only if at least one group is created. Enter the group name. Deleting Groups Select a group name, and click Edit. In the Edit Group window displayed, click Delete. Click Yes.
  • Page 96 Using MDC Schedule Management Creating Schedules Create and register a schedule on a group basis. Click All Schedule List in the schedule section on the left side of the program window. The Add button will be enabled in the middle. Click the Add button.
  • Page 97 Using MDC Click Add below the Device Group item, and select the group you want to add a schedule to. Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window. Device Group: Select a group.
  • Page 98: Troubleshooting Guide

    Using MDC 3.6.14 Troubleshooting Guide Issue Solution The display you want to control Check the connection of the RS232C cable (check that the does not appear on the system cable is properly connected to appropriate serial port). information chart. Check that another display with a duplicate ID is not connected.
  • Page 99 Using MDC How display properties are shown when multiple displays are used When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. When two displays are selected (e.g. in sequence of ID 1 andID 3): The settings for ID 1 are displayed before the settings for ID 3.
  • Page 100: Screen Adjustment

    Screen Adjustment Configure the Picture settings (Brightness, Colo(u)r Tone, etc.). The layout of the Picture menu options may vary depending on the product. Picture Mode MENU Picture Picture Mode ENTER Select a picture mode (Picture Mode) suitable for the environment where the product will be used. Different Picture Mode options are displayed depending on the current input source.
  • Page 101: Backlight / Contrast / Brightness / Sharpness / Colo(u)r / Tint(g/r)

    Screen Adjustment Backlight / Contrast / Brightness / Sharpness / Colo(u)r / Tint(G/R) MENU Picture ENTER Your product has several options for adjusting picture quality. Select an option using the buttons, and then press [ ]. Use the arrow keys to adjust the option value or select an option setting. When done, press [ When you make changes to Backlight, Contrast, Brightness, Sharpness, Colo(u)r...
  • Page 102: Picture Size

    Screen Adjustment 4.3.1 Picture Size If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we highly recommend you use your product 16:9 mode most of the time. 16:9: Sets the picture to 16:9 wide mode. ...
  • Page 103: Position

    Screen Adjustment Press the button to move the picture up or down. Press the [ ] button. Select Close by pressing the buttons sequentially. To reset the picture position, press Reset. To use the Position function after selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) or Custom, follow these steps.
  • Page 104: Using The 3d Function (ue46a & Ue55a Models Only)

    4.5.1 3D Mode This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses to view 3D video. 4.5.2 Viewing product Using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.
  • Page 105 Screen Adjustment 3D Mode Operation Turns the 3D function off. Changes a 3D image to 2D. Side by Side Displays two images next to each other. Top & Bottom Displays one image above another. Line by Line Displays the images for the left and right eye alternately in rows.
  • Page 106 Screen Adjustment Resolution Frequency (Hz) 1280 x 720p 25 / 50 Hz 1920 x 1080i 25 / 50 Hz 1920 x 1080p 25 / 50 Hz Resolution supported for HDMI PC mode The resolution for HDMI PC mode is optimized to 1920 x 1080 input. An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.
  • Page 107: Advanced Settings

    Screen Adjustment 3D Active Glasses from Samsung’s previous product (IR type) or other manufacturers not be  supported. When the product is initially powered on, may take some time until the 3D display is optimized.  The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices ...
  • Page 108: Dynamic Contrast

    Screen Adjustment 4.6.2 Dynamic Contrast Adjust the screen contrast. Medium High  4.6.3 Shadow Detail Increase the brightness of dark images. 4.6.4 Gamma Adjust the primary color intensity. 4.6.5 Expert Pattern Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other than the Picture menu is opened, the product saves the calibration and the Expert Pattern screen...
  • Page 109: White Balance

    Screen Adjustment 4.6.8 White Balance Adjust the colour temperature for a more natural picture. R-Offset G-Offset / B-Offset: Adjust each color (red, green, blue) darkness.  R-Gain G-Gain / B-Gain: Adjust each color (red, green, blue) brightness.  Reset: Resets the White Balance to it’s default settings.
  • Page 110: Picture Options

    Screen Adjustment Picture Options MENU Picture Picture Options ENTER Select an option using the up and down arrow keys, and the press [ ]. Use the arrow keys to change the setting, and then press [ When connecting a PC, you can only make changes to the Colo(u)r Tone.
  • Page 111: Mpeg Noise Filter

    Screen Adjustment 4.7.4 MPEG Noise Filter Reduces MPEG noise to provide improved picture quality. Medium High Auto  4.7.5 HDMI Black Level Lets you adjust the screen depth by selecting a black level. Normal  Available only in HDMI mode. 4.7.6 Film Mode Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
  • Page 112: Reset Picture

    Screen Adjustment This is only supported if the Auto Motion Plus Motion Plus) is set to Custom. Reset: Restore Motion Plus settings to default values.  The color on screen may vary with this option unintentionally.  Disabled when is set to On. ...
  • Page 113: Sound Adjustment

    Sound Adjustment Configure the sound (Sound) settings for the product. Sound Mode MENU Sound Sound Mode ENTER Use the up and down arrow keys to select an option, and then press [ Sound Sound Mode Standard Sound Effect 3D Audio Speaker Settings Reset Sound Standard: Selects the normal sound mode.
  • Page 114: Audio (ue46a & Ue55a Models Only)

    Sound Adjustment SRS CS Headphone (Off / On)  You can hear virtual 5.1ch surround sound over the headphones. Equalizer  The Equalizer displays a series of sliders. Use the up and down arrow keys to select a slider. Use the left and right arrow keys to change the slider’s value.
  • Page 115: Reset Sound

    Sound Adjustment Auto Volume (Off Normal / Night)  Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the same. Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night useful at night, when you may want to keep the volume low.
  • Page 116: Media

    Media MagicInfo Lite MENU Media MagicInfo Lite ENTER[ Press the MagicInfo Lite button on the remote control. 6.1.1 MagicInfo Lite Player Guide MagicInfo Lite Player allows you to play content (image, video, document files) at a desired time. You can play content saved in internal memory or USB memory. You can also play content via MagicInfo Lite Server after connecting to a network.
  • Page 117: Playing A Video

    Media Videos MENU Media Videos ENTER[ Connecting a USB Device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. When a USB device is connected to the product, the Connected Device screen appears.
  • Page 118 Media Supported Video Formats File Frame Audio Container Video Codec Resolution rate(M Extension rate(fps) Codec bps) DivX 3.11 / 4.x / 1920x1080 6 ~ 30 5.1 / 6.0 MP3 / AC3/ H.264 BP / MP / *.avi LPCM / 1920x1080 6 ~ 30 *.mkv ADPCM /...
  • Page 119 Media Sound or video may not work if the contents have a standard bitrate/frame rate above the  compatible Frame/sec listed in the table above. If the Index Table is in error, the Seek (Jump) function is not supported.  You may experience file stuttering while playing a video through a network connection.
  • Page 120 Media Press the button to select a chapter you want to view. Playback will start from the chapter you selected. Downloaded From TV-Manual.com Manuals Media...
  • Page 121: Photos

    Media Photos MENU Media Photos ENTER[ Connecting a USB Device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. When a USB device is connected to the product, the Connected Device screen appears.
  • Page 122: Music

    Media Music MENU Media Music ENTER[ Connecting a USB Device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. When a USB device is connected to the product, the Connected Device screen appears.
  • Page 123 Media Playing My Playlist Select the My Playlist folder and it will play automatically. Press the button to play a different music file within the play list. To delete a file from Playlist, select the recycle bin icon next to the file you want to delete by using the direction buttons, and then press [ ].
  • Page 124: Videos / Photos / Music - Additional Functions

    Media Videos / Photos / Music - Additional Functions 6.5.1 Sorting the file lists To sort files in the file lists, select the (Sorting) icon in the top right of the screen by using the button. Then, press the [ ] button.
  • Page 125: Videos/photos/music Play Option Menu

    Media 6.5.2 Videos/Photos/Music Play Option menu When playing video or photo files, you can press the TOOLS button to display an Options menu. Below are a series of tables listing the options available and the media each option applies to. Option Name Operations Videos...
  • Page 126 Media Option Name Operations Videos Photos Music Start Slide Show You can start or stop a slide show. Stop Slide Alternatively, use the button on the ▶ Show remote. Slide Show You can select the slide show speed during Speed the slide show.
  • Page 127: Edit Name

    Media Source MENU Media Source ENTER[ Source allows you to select a variety of sources and change source device names. 6.6.1 Source You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source.
  • Page 128: Information

    Media When connecting a PC to the HDMI IN port with HDMI cable, you should set the product to  mode under Edit Name. When connecting a PC to the HDMI IN port with HDMI to DVI cable, you should set the product to ...
  • Page 129: Allshare

    Search with file names  And many others  To use the original DLNA functions of Samsung fully, it is recommended that you use the  AllShare™ software provided with your product. Refer to page 138 for details about the AllShare Settings menu.
  • Page 130: Network

    Network Network Settings 7.1.1 Connecting to a Wired Network There are three ways to attach your product to your LAN using cable: You can attach your product to your LAN by connecting the LAN port on the back of your product to ...
  • Page 131: Wired Network Settings

    Network access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen when you set up the network connection.
  • Page 132 Network Manual Network Setup Use the Manual Network Setup when connecting your product to a network that requires a Static IP address. Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these steps. Right click the Network icon on the bottom right of the screen.
  • Page 133: Connecting To A Wireless Network

    Network 7.1.3 Connecting to a Wireless Network To connect your product to your wireless network, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2 or WIS10ABGN - sold separately), which you connect to your product back or side panel USB port. See the illustration below.
  • Page 134: Wireless Network Setting

     One Foot Connection  The product may not recognize the Samsung Wireless LAN adapter if you connect it to the  product with a USB hub or USB extension cable other than the cable supplied with the product. 7.1.4 Wireless Network Setting...
  • Page 135 Network If you want to set up the connection manually, select Settings. Then, go to the next  section, “How to set up manually”. Manual Network Setup Use the Manual Network Setup when connecting your product to a network that requires a Static IP address or if the automatic connection process has failed.
  • Page 136: Wps(pbc)

    The network connection screen appears, and network setup is done. 7.1.6 One Foot Connection One Foot Connection function lets you connect your Samsung product automatically to a Samsung wireless routers. If your wireless router does not support One Foot Connection, you must connect using one of the other methods.
  • Page 137: Ad Hoc Network Setup

    This Priority QOS function is unique to Samsung wireless routers. You can connect a Samsung wireless router to many devices, such as laptops, mobile phones, BD players etc. But, when you connect a Samsung product to a Samsung wireless router, the Samsung wireless router gives the Samsung product a priority connection.
  • Page 138: Network Status

    Network If a device is connected once, it is displayed in the Network Setting list. When you connect to  it again, you can find it in the list. Network Status MENU Network Network Status ENTER You can check the current network and Internet status. Network Network Settings Network Status...
  • Page 139: Magicinfo Lite Settings

    Network Delete: Deletes the devices from the list.  This function only deletes the name of the device from the list. If the deleted device is turned on or tries to connect to the product, it may appear on the list again. Using the Media Function An alarm window appears informing you that media contents (videos, photos, music) sent from a mobile phone will be displayed on your product.
  • Page 140 Network Internal Memory: Displays the space currently being used or deletes all content.  USB: Displays the space currently being used.  Slideshow Image Viewer Time: Sets the time length you want to display images played from Local  Schedule or by one of the auto playback functions.
  • Page 141: System

    System Multi Control MENU System Multi Control ENTER Assign an individual ID to your product. 8.1.1 Configuring settings for Multi Control MDC Connection  Select a method to connect to MDC to receive the MDC signal. RS232C MDC  Communicate with MDC via the RS232C-stereo cable. RJ45 MDC ...
  • Page 142: Clock Set

    System Time MENU System Time ENTER You can configure Clock Set Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. 8.2.1 Clock set Set the clock to use the various various timer features of the product. If you disconnect the power cord, you have to set the clock again.
  • Page 143: Off Timer

    System The check mark indicates days you’ve selected. Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to  enter numbers. Use the left and right arrow buttons to change entry fields. Volume: Set the desired volume level.
  • Page 144: Menu Language

    System Delete: Delete all items from the list of holidays. Select Delete. The message "Delete all holidays?" will appear. Select Yes. All holidays will be deleted. Apply: Set the On Timer Off Timer to not activate on public holidays.  Press ENTER[ ] to select the On Timer...
  • Page 145: Eco Solution

    System Eco Solution MENU System Eco Solution ENTER 8.4.1 Energy Saving Save power with the Energy Saving feature. While Energy Saving mode is active, the product power consumption will be controlled to save power. Medium High Picture Off  8.4.2 Eco Sensor (Off / On) To enhance your power savings, the picture settings will automatically adapt to the light in the room.
  • Page 146: No Signal Power Off

    System 8.4.3 No Signal Power Off To avoid unnecessary energy consumption, you can set how long you want the product to remain on if it’s not receiving a signal. 15 min. 30 min. 60 min.  Disabled when an attached PC is in power saving mode. ...
  • Page 147: Change Pin

    System 8.5.3 Change PIN Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Re- enter the same 4 digits in Confirm New PIN. When the Confirm screen disappears, press the Close button.
  • Page 148: Auto Protection Time

    System Auto Protection Time MENU System Auto Protection Time ENTER If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the formation of burnt in ghost images on the screen. 2 hours 4 hours 8 hours...
  • Page 149: Screen Burn Protection

    System Screen Burn Protection MENU System Screen Burn Protection ENTER To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. The Pixel Shift Time setting allows you to program the time between movements of the picture in minutes.
  • Page 150: Pixel

    System Mode: You can change the Safety Screen Type.  Period: Use this function to set the execution period for each mode set in the timer.  Time: Within the set period of time specify a time for execution.  8.8.3 Pixel This function prevents after-images by moving many pixels on the screen.
  • Page 151: Video Wall

    System Video Wall MENU System Video Wall ENTER Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide.
  • Page 152: Screen Position

    System according to the number entered. A maximum of 15 displays can be assigned to the horizontal arrangement. The screen can be divided into a maximum of 100 screens (horizontal and vertical screens  multiplied). For example, if the horizontal arrangement is set to 15, a maximum of 6 displays can be assigned to the vertical arrangement.
  • Page 153: Source Autoswitch Settings

    System 8.10 Source AutoSwitch Settings MENU System Source AutoSwitch Settings ENTER Turning on the display with Source AutoSwitch On, and the previous video source selection is not  active, the display will automatically search the different video input sources for active video. Source AutoSwitch ...
  • Page 154: Max. Power Saving

    System 8.11 General MENU System General ENTER General Max. Power Saving Game Mode BD Wise Auto Power Standby Control Auto Lamp Schedule OSD Display 8.11.1 Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
  • Page 155: Bd Wise

    System 8.11.3 BD Wise Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which support Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution. Available when you connect Samsung products that support...
  • Page 156: Power On Adjustment

    System 8.11.8 Power On Adjustment You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds) A warm-up time that is too short may damage the product due to overvoltage. 8.11.9 Temperature Control Temperature Control ...
  • Page 157: Anynet+(hdmi-cec)

    Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
  • Page 158: Auto Turn Off

    System Anynet+ Menu Description (device_name) Tools Shows the tools menu of the connected device. E.g. if a DVD player is connected, the tools menu of the DVD player will appear. Depending on the device, this menu may not be available. (device_name) Title Menu Shows the title menu of the disc in the connected device.
  • Page 159 System Listening through a Receiver You can listen to sound through a receiver (i.e Home Theater) instead of the Internal Speaker. Select Receiver and set to On. Press the EXIT button to exit. If your receiver supports audio only, it may not appear in the device list. ...
  • Page 160: Receiver

    System Problem Possible Solution The connected device is not Check whether or not the device supports Anynet+ functions.  displayed. Check whether or not the HDMI cable is properly connected.  Check whether Anynet+ (HDMI-CEC) is set to in the Anynet+ ...
  • Page 161: Divx® Video On Demand

    System Network Remote Control ENTER Turn on/off or give permission to Samsung mobile phone devices to connect with and control the product. You must have a Samsung Mobile phone/device which supports Wireless Remote Control. For more details, refer to each device’s manual.
  • Page 162: Support

    9.1.1 By USB To upgrade by USB, follow these steps: Visit www.samsung.com. Download the latest USB software upgrade exe archive to your computer. Extracts the exe archive to your computer. You should have a single folder with the same name as the exe file.
  • Page 163: Contact Samsung

    Support Contact Samsung MENU Support Contact Samsung ENTER View this information when your product does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.
  • Page 164: Magicinfo Lite

    MagicInfo Lite 10.1 File Formats Compatible with MagicInfo Lite Player [Read before using MagicInfo Lite Player] Supported USB-device file systems include FAT16 and FAT32. (NTFS is not supported.)  A file with a vertical and horizontal resolution larger than the maximum resolution cannot be ...
  • Page 165 MagicInfo Lite Frame Bit rate Audio File Container Video Codec Resolution Extension rate(fps) (Mbps) Codec H.264 BP / MP / HP 1920x1080 6 ~ 30 ADPCM / AAC *.3gp 3GPP MPEG4 SP / ASP 1920x1080 6 ~ 30 HE-AAC MPEG1 352x288 24 / 25 / 30 AC3 / MPEG /...
  • Page 166 MagicInfo Lite Image Compatible image file format : Jpeg  Supported maximum resolution : 15,360 x 8640  Supported image effects : 8 effects (Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe)  Flash Compatible with Flash 10.1  Flash Animation ...
  • Page 167 MagicInfo Lite Power Point Compatible document file formats  Extension : ppt, pptx  Version : Office 97 ~ Office 2007  Functions not supported  Animation effect  3D shapes (which will be displayed in 2D)  Header and footer (some subitems are not supported) ...
  • Page 168: Network Schedule

    MagicInfo Lite 10.2 Network Schedule 10.2.1 Connecting to a server To use the MagicInfo Lite Server, the clock on the monitor must be set through the server (web). To use local schedules and AutoPlay only, without using the MagicInfo Lite Server, the clock must be set using the remote control.
  • Page 169: Magicinfo Lite Settings

    MagicInfo Lite 10.2.2 MagicInfo Lite Settings MENU Media MagicInfo Lite ENTER Press the MagicInfo Lite button on the remote control. You can view whether the server is connected (approval) in the MagicInfo Lite menu screen. To view whether the server is connected when a network schedule is running, press INFO on the remote.
  • Page 170 MagicInfo Lite Select Device from the top menu bar. Select Lite Device from the menus on the left. Downloaded From TV-Manual.com Manuals 10 MagicInfo Lite...
  • Page 171 MagicInfo Lite Select View Unapproved Lite Device from the sub-menus of Lite Device. Select the Approve button for your device from the list of unapproved Lite devices. Pressing the INFO button on the remote when a network schedule is running will display the details of the schedule.
  • Page 172 MagicInfo Lite Select the View All Lite Device menu to check that the device has been registered. When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded. For further details on how to configure a schedule, refer to the <MagicInfo server user's manual>.
  • Page 173: Setting The Current Time

    MagicInfo Lite 10.2.4 Setting the current time A schedule may not run if the time set on the device is different from the server's current time. Go to the tabs Device Time. Select your device. Select Clock Set, and sync the time with the server. For further details on how to manage the time (scheduling, holiday management, etc.), refer to the <MagicInfo server user's manual>.
  • Page 174: Local Schedule

    MagicInfo Lite 10.3 Local Schedule Run a schedule created by Local Schedule Manager. Go to Local Schedule Manager Select the content you want to run This menu is disabled if no schedule was created by Local Schedule Manager. Select Local Schedule Manager in the MagicInfo Lite menu screen.
  • Page 175 MagicInfo Lite Select Create in the Local Schedule Manager screen. Local Schedule Manager Create Storage Internal Memory Edit No Playing Schedule Delete Info Close Select Time to set the time you want to play content. To create a schedule that starts on one day and finishes the next day, the time must be set as shown below.
  • Page 176 MagicInfo Lite Select Contents to specify the content you want to play. Contents Internal Memory No Item Folder1 Menu1.jpg Done Menu2.jpg Deselect Cancel Select Save. Select the memory space you want to save the content to. Create Delete Time 12:00 am ~ 02:00 pm Conten Where do you want to save? Time...
  • Page 177: Modifying A Local Schedule Local Schedule

    MagicInfo Lite 10.4.2 Modifying a local schedule Local Schedule Ensure at least one local schedule Local Schedule is registered. Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode...
  • Page 178: Deleting A Local Schedule Local Schedule

    MagicInfo Lite Select Edit. Edit Delete Time 12:00 am ~ 02:00 pm Contents Menu1.jpg Time --:-- am ~ --:-- pm Save Contents No Item Cancel Change the details of the local schedule. Next, select Save. 10.4.3 Deleting a local schedule Local Schedule Ensure at least one local schedule Local Schedule is registered.
  • Page 179 MagicInfo Lite Select the local schedule you want to delete. Local Schedule Manager Create Storage Internal Memory Edit No Playing Schedule Delete 20110101_1200.Isch Info Close Select Delete. Local Schedule Manager Create Storage Internal Memory Edit Do you want to delete schedule? elete Info Close...
  • Page 180: Running A Local Schedule Local Schedule

    MagicInfo Lite 10.4.4 Running a local schedule Local Schedule Ensure at least one local schedule Local Schedule is registered. Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode...
  • Page 181: Stopping A Local Schedule Local Schedule

    MagicInfo Lite 10.4.5 Stopping a local schedule Local Schedule Selecting will change the running This function is enabled only when a schedule is running. Stop mode from local schedule to network schedule. Select Local Schedule Manager in the MagicInfo Lite menu screen.
  • Page 182: Viewing The Details Of A Local Schedule Local Schedule

    MagicInfo Lite 10.4.6 Viewing the details of a local schedule Local Schedule Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected Select the local schedule you want to view the details of.
  • Page 183: Copying Content

    MagicInfo Lite 10.5 Contents Manager 10.5.1 Copying content Select Contents Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule · Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected Select the content you want to copy. If content under Internal Memory is selected: You can copy the content under...
  • Page 184: Deleting Content

    MagicInfo Lite 10.5.2 Deleting content Select Contents Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule · Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected Select the content you want to delete. Content under Internal Memory USB memory...
  • Page 185: Internal Autoplay

    MagicInfo Lite 10.6 Internal AutoPlay 10.6.1 Running Internal AutoPlay Ensure at least one content item exists under Internal Memory. Select Internal AutoPlay in the MagicInfo Lite menu screen. Play content, which has been copied to , in alphabetical order. Internal Memory ...
  • Page 186: When Content Is Running

    MagicInfo Lite USB AutoPlay will automatically run if USB memory is connected when Network Schedule  Local Schedule is running. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected 10.8 When Content is Running 10.8.1 Viewing the details of the content that is running...
  • Page 187: Changing The Settings For The Content That Is Running

    MagicInfo Lite Schedule Download: Displays the progress of a network schedule being downloaded from the server. Information Software Version : A-VNUSCDSP-100 Device Name : Monitor Device ID : FE-FF-FF-FF-FF Mode : Network Schedule Server : Connected : Connected Schedule Download : No Schedule to download Close 10.8.2 Changing the settings for the content that is running...
  • Page 188: Troubleshooting Guide

    11.1 Requirements Before Contacting Samsung Customer Service Center 11.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
  • Page 189: Check The Followings

    Troubleshooting Guide 11.1.3 Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. ("2.2 Connecting and Using a PC") Blank spaces are found on all four sides of the The blank spaces found on the screen have screen when an HDMI or HDMI-DVI cable is nothing to do with the product.
  • Page 190 Troubleshooting Guide Screen issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range There are shadows or ghost images left on the...
  • Page 191 Troubleshooting Guide Remote control issue The remote control does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected. Check for any special lighting or neon signs switched on in the vicinity.
  • Page 192 Troubleshooting Guide 11.2 Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? "Windows XP": Go to Control Panel Appearance and  Themes Display Settings Advanced Monitor and adjust the frequency in Monitor Settings. "Windows ME/2000": Go to Control Panel Display ...
  • Page 193 Troubleshooting Guide Question Answer How can I change the "Windows XP": Go to Control Panel Appearance and  resolution? Themes Display Settings and adjust the resolution. "Windows ME/2000": Go to Control Panel Display  Settings and adjust the resolution. "Windows Vista": Go to Control Panel Appearance and ...
  • Page 194: Specifications

    Specifications 12.1 General Model Name ME40A / DE40A ME46A / DE46A ME55A / DE55A Size 40 inches (101cm) 46 inches (116cm) 55 inches (138cm) Panel Display area 885.6(H) x 498.15(V) 1018.08(H) x 572.67(V) 1209.6(H) x 680.4(V) Display Color 16.7M 1.07B 921.2 x 536.1 x 29.9...
  • Page 195 Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential  requirements and other relevant provisions of Directive 1999/5/EC. The official Declaration of Conformity may be found at http://www.samsung.com, go to Support >  Search Product Support and enter the model name.
  • Page 196: Powersaver

    Normal Power saving (Power Button Operation mode off) Power Indicator Blinking ME40A : 100 W ME46A : 140 W ME55A : 160 W UE46A : 140 W Power Consumption less than 1 W less than 1 W (General) UE55A : 160 W...
  • Page 197: Preset Timing Modes

    Specifications 12.3 Preset Timing Modes This product can be set to only one resolution for each screen size to obtain the optimum picture  quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality.
  • Page 198 Specifications Horizontal Vertical Sync Pixel Clock Resolution Frequency Frequency Polarity (H/ (MHz) (kHz) (Hz) VESA, 1280 x 960 60.000 60.000 108.000 VESA, 1280 x 1024 63.981 60.020 108.000 VESA, 1280 x 1024 79.976 75.025 135.000 VESA, 1360 x 768 47.712 60.015 85.500 VESA,1920 x 1080...
  • Page 199: License

    Specifications 12.4 License TheaterSound HD, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound HD technology is incorporated under license form SRS Lab, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double- D symbol aretrademarks of Dolby Laboratories. Manufactured under license under U.S.
  • Page 200: Appendix

    Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Downloaded From TV-Manual.com Manuals Appendix...
  • Page 201 0-800-777-08 http://www.samsung.com PUERTO RICO 1-800-682-3180 http://www.samsung.com TRINIDAD & TOBAGO 1-800-SAMSUNG (726-7864) http://www.samsung.com VENEZUELA 0-800-100-5303 http://www.samsung.com EUROPE ALBANIA 42 27 5755 http://www.samsung.com AUSTRIA 0810 - SAMSUNG http://www.samsung.com (7267864, € 0.07/min) BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) Downloaded From TV-Manual.com Manuals Appendix...
  • Page 202 CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 DENMARK 70 70 19 70 http://www.samsung.com FINLAND 030 - 6227 515 http://www.samsung.com...
  • Page 203 Appendix EUROPE SPAIN 902 - 1 - SAMSUNG http://www.samsung.com (902 172 678) SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG http://www.samsung.com/ch (7267864, CHF 0.08/min) http://www.samsung.com/ch_fr (French) 0330 SAMSUNG (7267864) http://www.samsung.com EIRE 0818 717100 http://www.samsung.com LITHUANIA 8-800-77777 http://www.samsung.com LATVIA 8000-7267 http://www.samsung.com...
  • Page 204 1800 266 8282 INDONESIA 0800-112-8888 http://www.samsung.com 021-5699-7777 JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) http://www.samsung.com for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com THAILAND 1800-29-3232 http://www.samsung.com 02-689-3232 TAIWAN 0800-329-999 http://www.samsung.com 0266-026-066...
  • Page 205 Appendix AFRICA GHANA 0800-10077 http://www.samsung.com 0302-200077 KENYA 0800 724 000 http://www.samsung.com NIGERIA 0800-726-7864 http://www.samsung.com SENEGAL 800-00-0077 http://www.samsung.com SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung.com TANZANIA 0685 88 99 00 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com Downloaded From TV-Manual.com Manuals Appendix...
  • Page 206: Optimum Picture Quality And Afterimage Burn-in Prevention

    Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and  refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
  • Page 207: Prevention Of Afterimage Burn-in

    Appendix Prevention of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.
  • Page 208 Power off the product for 4 hours after using it for 20 hours. (DE40A / DE46A / DE55A)  Power off the product for 2 hours after using it for 12 hours. (ME40A / ME46A / ME55A / UE46A ...
  • Page 209 Appendix The best way to protect the product from afterimage burn-in is switching the power off or  setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide. Downloaded From TV-Manual.com Manuals Appendix...
  • Page 210: Correct Disposal Of This Product (waste Electrical & Electronic Equipment) - Europe Only

    Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
  • Page 211: Terminology

    Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen.
  • Page 212 Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g.
  • Page 213 Picture Size Problem report Batteries Remote Control Changing the Resolution Reset All Communicate with MDC via the RS232C- stereo cable. Contact SAMSUNG WORLDWIDE Custom settings screen Screen Adjustment Screen Position Sleep Timer Eco Solution Software Upgrade Energy Saving Source AutoSwitch Settings...

This manual is also suitable for:

De40aDe46aDe55aUe46aUe55aMe46a ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: