5.1 Setup
The Pool Cleaner is very simple to use. Simply place it in the pool and make sure that it is correctly
positioned on the floor of the pool.
Turn it ON and enable it to complete the task.
Before using the Pool Cleaner for the first time, perform the following steps:
Unwind the blue cable and stretch it out completely so that it has no kinks.
5.1.1
Remove the plastic coverings from the
brushes.
5.1.2
Attach the floating cable to the power supply: Insert
the cable with the notch on the
5.2 Adjust the Handle Angle
The robot's handle should be adjusted and locked diagonally in order to ensure optimum cleaning results.
The handle angle can be adjusted also to determine the speed at which the robot advances along the
waterline.
CLASSIC 8+ / TOP 8
User Instructions
|
B
A
5