Maintenance; Trouble Shooting - PROEL STARPOINT 575CN User Manual

lamp do not touch the lamp globe. The lamp shall be firmly planted to
avoid bad connection and damage to the circuit.

MAINTENANCE

Clean the machine, lens, machine interior and computer board regularly.
Fasten the screws and nuts in the hoisting parts and the racks regularly.
Replace lamps according to the actual situation. Do not use inferior
quality lamps.

TROUBLE SHOOTING

The lamp does not work
Check whether the power supplied is 230 V AC and whether the
•
fuse is burnout.
The lamp is not cool enough. Let it cooled down.
•
The lamp is in over heat protection status due high interior
•
temperature. Check whether the fan and the air duct are blocked.
Inferior or aged lamp. Replace the lamp.
•
Igniter degradation or poor contact. Replace according to the original
•
circuit.
Ballast damaged.
•
The motors do not work correctly
Check whether the power supplied is 230 V AC and whether the use
•
is blown.
Check whether the motor lines or connecting lines are degraded or
•
broken.
Check whether the small flange screws for mechanical fastening is
•
loose, poor in contact, aged or blown.
Check whether the output voltage of the transformer is normal.
•
10