Technical Informations; Maintenance And Cleaning - PROEL SG HDBEAM User Manual

8. TECHNICAL INFORMATIONS

Lamp: OSRAM SIRIUS HRI 230W
Colour temperature: 8000 K, Average life: 3000 hours
Power supply: AC ~ 100-240V 50/60Hz
DMX channels: 2 DMX protocol modes 16 / 20
Display: Blue / white LCD graphic
Interchangeable color wheel with 14 colors+open
Color wheel:
Interchangeable gobo wheel with 17 fixed gobos + open
Gobo wheel:
• Beam angle 3.8°
• High speed shake effect
• 8-facet rotating prism
• Frost filter
•
Mechanical shutter and adjustable speed strobe effect
• Mechanical dimmed
• Selectable 16 bit pan/tilt movement resolution Pan: Pan: 540°
• Pan/Tilt used 3-PHASE 1.2° - ENCAPSULATED STEPPING MOTOR
• Maximum speed:
• Resolution:
IP rating IP 20:
• Protected against the entry of solid bodies larger than 12mm (0.47").
• No protection against the entry of liquids.

9. MAINTENANCE AND CLEANING

To ensure optimal operation and performance for a long time it is essential to periodically clean the parts
subject to dust and grease deposits. The frequency with which the following operations are to be carried out
depends on various factors, such as the amount of the effects and the quality of the working environment (air
humidity, presence of dust, salinity, etc.).
Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the reflectors
and filters. It is recommended that the projector undergoes an annual service by a qualified technician for
special maintenance involving at least the following operations:
• General cleaning of internal parts.
• Restoring lubrication of all parts subject to friction, using lubricants specifically
• General visual check of the internal components, cabling, mechanical parts, etc.
• Electrical, photometric and functional checks; eventual repairs
PAN = 2.10 sec TILT = 1.20 sec
PAN = 2.11° PAN FINE = 0.008°
TILT = 0.98° TILT FINE = 0.004°
Disconnect from the mains before starting any maintenance work.
Tilt: 252°
CAUTION!
34