Installing The Speakers On The Tallboy Stand - Samsung HT-C7550W User Manual

Installing the Speakers on the Tallboy Stand

1. Connect the Stand Pole to the Stand Bracket.
2. Insert and tighten three large screws into the three holes on the
Stand Bracket as shown in the illustration.
3. Straighten the speaker wire and route it through the Stand Pole.
4. Connect the Stand Pole to the Stand Neck and
Stand Base.
- Make sure all holes are properly connected,
if not, the stand will fall down.
1
2
3
4
Stand Neck
Stand Base
Stand Pole
Stand Bracket
Stand Pole
19
English