Watching A Movie - Samsung HT-C7550W User Manual

Watching a Movie

You can play video fi les stored in the iPod player
by connecting it to the product.
1. Connect the iPod dock connector to the
iPod Jack on the rear panel of the product.
2. In the iPod screen, move to Settings >
Videos, then set the TV Out option and the
TV signal.
3. Place the iPod in the supplied iPod Dock.
•
"iPod" message appears on the TV
screen.
4. Press the RED(A) button.
5. Press the ▲▼ buttons to select iPod, then press
the ENTER button.
6. Press the ◄► buttons to select Videos, then
press the ENTER button.
7. Select the video fi le to play.
- You can use the remote control or the
product to control simple playback functions
such as the PLAY, PAUSE, STOP, # /$
and /buttons. (See page 15.)
iPod models that can be used with
this product
iPod nano iPod
3rd generation 5th generation
(video) (video)
iPod touch iPod touch
1st generation 2nd generation
iPod classic iPhone
✎
NOTE

You must have the VIDEO output (Composite)
connected to your TV to view iPod video (See page 25).

If you want to iPod video via VIDEO output, set
Anynet+(HDMI-CEC) to off.

No other screen than the playback one will appear on
the TV screen. Check other screens on the iPod player.

If the connected iPod does not support video playback,
the "Cannot play video fi les saved on this iPod"
message appears when you select the Video menu.

Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
iPod nano
4th generation
(video)
iPhone 3G
57
English