Samsung HT-C7550W User Manual page 41

Settings
Display Network Settings
Network Selection
Audio
System
Connecting to network.
Network
Network Name(SSID) : shj
Language
Security
General
Support
5. In the list of networks, press the ▲▼
buttons to select a network, and then press
the ENTER button.
6. If the PIN/Security pop-up appears, go to
Step 7. If the Network Connecting Screen
appears, go to Step 11.
7. Press the ▲▼ buttons to select PIN or
Security.
For most home networks, you would select
Security (for Security Key).
8. On the Security screen, enter your network's
Pass Phrase.
✎
NOTE

You should be able to fi nd the Pass Phrase
on one of the set up screens you used to set
up your router or modem.
9. To enter the Pass Phrase, follow these
general directions:
• Press the number keys on your remote to
enter numbers.
• Use the arrow keys on your remote to
move from button to button on the
Security Key screen.
• To enter letters, move to the button
labelled a/A/1/, and then press the
ENTER button. Each time you press the
ENTER button, you change the kind of
characters you can enter (a/A/1/).
• To enter a letter, press the number button
that corresponds to the letter. Pressing
the button repeatedly changes the letter.
• To delete the last letter or number you
entered, move to the Delete button, and
then press the ENTER button.
• To clear all entered letters and numbers,
move to the Clear key, and then press the
ENTER button. You can also just press
the RED(A) button on your remote.
Stop
" Select ' Return
10. When done, press the YELLOW(C) button
on your remote, or move to the Done
button, and then press the ENTER button.
The Network Connecting screen appears.
11. Wait until the connection confi rmation
message is displayed, and then press the
ENTER button. The Network Settings
screen reappears.
12. To test the connection, press the ▼ button
to select Network Test, and then press the
ENTER button.
Setting Up the Wireless Network
Connection - Manual
If the Auto Setting does not work, you need to
enter the Network settng values manually.
To get the Network setting values from most
Windows computers, follow these steps:
1. Right click the Network icon on the bottom
right of the screen.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the
Support tab.
4. On the Support tab, click the Details button.
The Network settings are displayed.
To Enter the Network settings into your product,
follow these steps:
1. On the Internet Protocol Setup screen,
press the ENTER button.
2. Press the ▲▼ buttons to select Manual,
and then press the ENTER button.
3. Press the ▼ button to go to the fi rst entry
fi eld (IP Address).
4. Use the number buttons to enter numbers.
Settings
Network Settings
Display On-Screen Menu
Access Point Selection : Not Selected
Audio Disc Menu
Internet Protocol Setup : Manual
System Audio
IP Address
Network Subtitle
Subnet Mask
Language
Gateway
Security
DNS
General
DNS Server
Support
a PBC (WPS) > Move " Select ' Return
:
\
:
:
0 0 0
: 0
:
: 255 255 255 0
: 0 0 0 0
: Manual
: 0 0 0 0
41
English