Ntroduction; Electrical And Mechanical Safety Standards; Unpacking - Bodet 8000 Installation Manual

1. INTRODUCTION
We would like to thank you for choosing a BODET scoreboard.
This product has been carefully designed to meet your needs in accordance with ISO 9001 quality standards.
We recommend reading this notice carefully before beginning installation.
Retain this manual throughout the lifespan of your product so that you can refer to it when necessary.
Non-contractual data. Bodet reserves the right to make certain functional, technical, design and colour changes to
its devices without prior notice.
Failure to follow these instructions may cause irreversible damage and invalidate the warranty.

2. ELECTRICAL AND MECHANICAL SAFETY STANDARDS

This equipment should be installed and maintained by qualified personnel.
As 8000 sports scoreboards are connected to the mains electricity supply, they must be installed in compliance with
IEC 364 (NFC 15.100 in France).
Indoor installation (the scoreboard is protected against ball impacts to DIN 18032.3 standard).
The scoreboard mains power supply must include an easily accessible phase/neutral 16A circuit breaker upstream
of the power feed.
The equipment must be installed and all electrical connections done before turning on the power.
It is strictly against manufacturer's guidelines and dangerous to immerse the scoreboard in water or to clean it with
a hose.
Earth connection at installation uses either the TT or TN system.
Bodet accepts no liability for any usage not in accordance with these instructions.
Any modification to the product will invalidate the guarantee.

3. UNPACKING

Packaging:
Packaging of the
central panel and of
the mounting bracket
Packaging of other modules
3