Installing Additional Modules - Bodet 8000 Installation Manual

6. INSTALLING ADDITIONAL MODULES

This chapter explains how to install a 8000 series additional module. Mounting instructions are identical regardless
of the scoreboard model: 2NT15, 3NT15, 2T10, 2T20 or sheet metal advert panel
Reminder: the additional module must be assembled with the main scoreboard on the ground.
1) On the ground, remove the metal covers to access the attachment holes. For each plate, remove all the screws
then tilt the plate delicately while taking care to not snatch away the LED module cables.
Before
After
2) Disconnect the ribbon cables from the electronic cards The cable are labelled in order to avoid error at reconnecting
time:
4
3
2
1
12