Starting Up; Rain Gauge - ADE WS 1907 Operating Instructions Manual

Starting up

‚ Proceed in the order listed below and first
insert the batteries into the rain gauge. Only
then can the base station function properly.
‚ Do not use rechargeable batteries, since
their voltage is too low (only 1.2 V instead of
1.5 V). This affects, among other things, the
precision of the measurements.
‚ Where possible, use alkaline rather than
zinc-carbon batteries. Alkaline batteries
last longer, especially at low outdoor
temperatures.

Rain gauge

Please note the illustration in the previous chapter.
1. Squeeze the two locking tabs on the side of the rain
funnel and pull it off.
2. Squeeze the two locking tabs of the measuring unit
and pull it up. The battery compartment is located on
the underside.
3. Insert 2 batteries of type LR/R6 (AA)/1.5 V as depicted
on the bottom of the battery compartment. Pay
attention to the correct polarity of the batteries (+/-).
4. Reassemble all parts together. Make sure the locking
tabs click into place.
56
WS 1907 digital rain gauge with DCF radio clock