Page 1
Installation Guide Check the contents attached to your machine. Plug the power code and telephone line cable. Attach the bigger ferrite core to the power code using a cable tie, and plug it to the machine and power outlet. The ferrite core should be near the AC power outlet.. File No:E135770 Attach the ferrite core to the LAN cable using a cable tie as illustrated, and plug it to the ma- ZA1-00336-00...
Page 2
Set the network setting. Turn the transport mode to “OFF”. When your network is using DHCP server this step is not necessary. Mode Press < > two seconds until you hear two beeps, and then press < >, < >, <...