Table of Contents
Advertisement
ETHERNET ISOLATOR
Safety
Informative Symbols
Note!
This symbol brings important information to your attention.
Action
This symbol marks an acting paragraph.
1.3
Declaration of Conformity
All products have been developed and manufactured taking into consideration applicable
European standards and regulations.
Note!
A Declaration of Conformity can be requested from the manufacturer.
The manufacturer of this product, Pepperl+Fuchs GmbH in D-68301 Mannheim, Germany, has
a certified quality assurance system in conformity with ISO 9001.
ISO9001
1.4
Intended Use
The Ethernet Isolator is used to generate a galvanically isolated intrinsically safe Ethernet
signal from a non-intrinsically safe Ethernet signal. It may be used to lead a standard Ethernet
cable through a hazardous Zone 0 or Zone 1 area. For bridging the intrinsically Ethernet line
through a hazardous area one Ethernet Isolator has to be used at each end.
The device is designed for mounting on a 35-mm DIN rail according to DIN EN 60 715.
The device is constructed to satisfy the IP20 protection classification and must be protected
accordingly from adverse environmental such as water spray or dirt exceeding the pollution
severity level 2.
6
Advertisement
Table of Contents
