Table of Contents
Advertisement
VCR
Connecting an RCA Audio/Video Input Cable
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples:
1
1
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the rear of the DVD-VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
3
3
Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the rear of the DVD-VCR.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
40
You wish to copy a video cassette with the help of a
second VCR .
You wish to play back and/or copy pictures taken
with a camcorder .
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
Take care to respect the colour coding of the left and right
channels.
Using the Assemble Edit Function
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
1
Insert the cassette to be edited in your DVD-VCR.
❿
2
Press the
ll button to start playback.
3
When you reach the position from which you wish to start the new
❿
recording, press the
ll button.
4
Press the F.ADV/STEP button again as often as
necessary to advance frame by frame, until the exact recording
position is located.
5
While the DVD-VCR is in still mode, hold the REC button ( )
down for a while to activate the Assemble Edit function.
6
Select the source from which you wish to record by pressing:
The PROG ( or
) buttons for television channels
The INPUT SEL. button for the LINE input sources
❿
7
Press the
ll button to start recording.
8
When you have finished recording, press
.
Recoding from Another VCR or Camcorder
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1
Connect the DVD-VCR, from which the cassette is to be copied, to
the appropriate RCA audio and video input connectors on the
rear of your DVD-VCR, as indicated on page 12.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR: LINE IN for the RCA input.
5
Start playing back the cassette to be copied.
6
Hold REC ( ) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press
on both VCR and
DVD-VCR.
If you wish to view the cassette being copied:
Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
VCR
VOLUME
PROG / TRK
4
2
OK
5
VCR
PROG
STANDBY/ON
STOP
REW
PLAY
FF
VOLUME
ECHO
SELECT EZ VIEW
MIC 1
MIC 2
2
7
OK
41
Advertisement
Table of Contents
