Using The Videoplus+ Feature; Modifying Videoplus+ Programming - Samsung SV-DVD1 Instruction Manual

Using the VIDEOPlus+ Feature

GB
Before presetting your DVD-VCR:
1
Up to six programmes can be preset.
STANDARD TIMER
VIDEO PLUS
E N D:S E T U P
V I D E O P L U S
CODE ---------
C O D E :0-9 C O R R E C T :
E N D:S E T U P
1/JAN MON 1 2 : 0 9
PR DAY START S T O P V / P
1 MO 1 1 2 : 0 0 1 2 : 5 0 S P -
-- ---- - - : - - - - : - - - - -
-- ---- - - : - - - - : - - - - -
-- ---- - - : - - - - : - - - - -
-- ---- - - : - - - - : - - - - -
-- ---- - - : - - - - : - - - - -
D E L E T E :C L E A R S E T U P
5
™ VIDEOPLUS+ is a trademark of Gemstar Development Corporation. The VIDEOPLUS+
28
Switch on both the television and your DVD-VCR
Check that the date and time are correct
Insert the cassette on which the programme is to be
recorded (safety tab intact)
1 To enter a VideoPlus, press the TIMER button.
Press the and buttons to select VIDEO PLUS
Result: A message is displayed to allow you to enter the
VIDEOPlus+ code.
If all six programmes have been set, the message
I S F U L L is displayed. Refer to page 31 if you wish to
cancel a preset recording.
2 Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
If you wish to correct the VIDEOPlus+ code that you are
entering:
Press the button until the digit to be corrected is
cleared
Enter the correct digit
3
Press the SETUP button.
Result: The information concerning the programme is displayed.
When using the VIDEOPlus+ function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the or buttons. Refer to the following page if:
The programme number or times flash
You wish to modify the programme
4
If the programme and times are correct, press the SETUP button.
5
Press the STANDBY/ON button to activate the timer.
6
Refer to page 31 if you wish to:
Check that your DVD-VCR has been programmed correctly
Cancel a preset recording
The numbers next to each TV programme listing are
VIDEOPlus+ code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the VIDEOPlus+ code for the programme
you wish to record.
system is manufactured under licence from Gemstar Development Corporation.

Modifying VIDEOPlus+ Programming

If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press SETUP a second time to confirm.
If you wish to...
Select an input source other
than the tuner (AV1, AV2 or AUX)
.
T I M E R
Record a programme every day
(Monday to Sunday) at the same time
Record a programme every week
on the same day and at the same time
Extend the recording time
Select the recording speed
Select the PDC recording
Then...
Press the or buttons, until the P R selection flashes.
Press the or buttons to change the input source
selection.
Result: The programme number is replaced by:
• The AV1, AV2 or AUX source using the
buttons for a satellite tuner or external video
source
The input source must be selected before changing any
other value.
Press the or buttons, until the selection flashes.
D A Y
Press the or buttons, until the D L Y (Daily) value is
displayed.
Press the or buttons, until the D A Y selection flashes.
Press the or buttons, until the (Week) value is
W -
displayed, followed by the required day.
Example: W - S A (Weekly Saturday)
Press the or buttons, until the S T O P selection flashes.
Press the or buttons to increase or decrease the stop
time.
Press the or buttons, until the recording speed selection
flashes.
Press the or buttons until the correct indication is
displayed:
• A U T O (Auto Tape Speed Select) : see page 30
• S P
(Standard Play)
• L P
(Long Play)
Press the or buttons, until the V/P selection flashes.
Press the or buttons until the "ON" indication is displayed.
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC ON
(by selecting "ON" in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won't take place.
29
GB
or