Using The Assemble Edit Function; Recording From Another Vcr Or Camcorder; Audio Dubbing A Pre-Recorded Cassette - Samsung SV-DVD1 Instruction Manual

Using the Assemble Edit Function

This function allows you to start a new recording at a specific
GB
position on the cassette while maintaining a very smooth scene
change.
2
5

Recording from Another VCR or Camcorder

You can copy a cassette to your SV-DVD1E from another video
source, such as another VCR or a camcorder.
7
6
42
1
Insert the cassette to be edited in your DVD-VCR.
2 Press the ll button to start playback.
3
When you reach the position from which you wish to start the new
recording, press the ll button.
4 Press the FRAME/STEP ( )button again as often as
necessary to advance frame by frame, until the exact recording
position is located.
5
While the DVD-VCR is in still mode, hold the REC button ( I
down for a while to activate the Assemble Edit function.
Result: Record symbol flashes in the display.
6
Select the source from which you wish to record by pressing:
The PROG( or ) buttons for television channels
The TV VIEW button for the AV1, AV2 or AUX input sources
7
Press the ll button to start recording.
8
When you have finished recording, press .
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1
Connect the DVD-VCR, fromwhich the cassette is to be copied, to
the appropriate SCART audio and video input connectors on the
rear of your DVD-VCR, as indicated on page 12.
2
Insert a blank cassette in your DVD-VCR.
3 Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4 Press the TV VIEW button to select the appropriate input on your
DVD-VCR:
AV1, AV2 for the SCART input
AUX for the RCA input
5 Start playing back the cassette to be copied.
6 Hold REC ( I ) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press on b o t h VCR and
DVD-VCR.
If you wish to view the cassette being copied:
Your SV-DVD1E must be connected as usual to the
television (see page 11 for further details)

Audio Dubbing a Pre-recorded Cassette

With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
A CD, DVD
A microphone connected to a sound system
A cassette player
Restriction:
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
)
1
Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
2 Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the Rear of your DVD-VCR.
3
Insert the pre-recorded cassette on which the audio track is to be
replaced, and press the ll to start playback.
4 Search for the Audio Dubbing (ending) point using the
the counter to 0:00:00 by pressing CLK/CTR and CLEAR.
5
Search back slightly beyond the Audio Dub start point using the
button.
6 Press the ll button.
Press the ll button one more time to make STILL mode.
7
Press A.DUB.
Result: Your VCR is now in the Audio dubbing Pause
mode.
8
Press the TV VIEW button to select Audio dubbing source.
ex) If you want to dub external cassette player, then select AUX.
9 On the sound system, locate the point on the cassette at which
you wish to start playback.
Example: The track that you wish to record on the cassette.
10
When you are ready:
Start playback on the sound system
Press the ll on the remote control.
Result: The soundtrack is replaced on the pre-recorded cassette.
11
The audio dubbing will finish when the counter reaches 0:00:00.
The new sound will be recorded on the normal sound
track of the tape, and the original sound will remain on
the Hi-Fi sound track.
To hear the new sound and original sound mixed
together, press the Audio button on the remote control
until the MIX option is displayed (see page 35).
2 2
, and set
7
A . D U B
- 0 : 0 5 : 2 3
43
GB