Table of Contents
Advertisement
Presetting the Stations Automatically
GB
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
2,3
You must preset the stations received through the tuner. This can
1
be done:
You can store up to 99 stations.
I N S T A L L A T I O N
E N T E R
E N D
:S E T U P
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH
: C H 6 0
E N D
:S E T U P
YOUR DATA WILL BE LOST
PRESS
E N T E R
TO CONTINUE
S E T U P
TO EXIT
AUTO SET UP
PLEASE WAIT
2 %
I - - - - - - - - - - - - - - - - - - - - I
E N D
:S E T U P
20
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 21)
1
Press the SETUP button on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
,
or ,
buttons to select the
I N S T A L L A T I O N
option.
3
Press the ENTER button to select this option.
Result:
The
INSTALLATION
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is placed
in front of the
AUTO SET UP
option.
And then press the
button to select this option.
Result:
A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
5
Press ENTER to start the auto scanning.
Result:
The
indication flashes on the
P L E A S E W A I T
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The DVD-VCR then searches for the second station
and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
6
If you wish to cancel the auto scanning before the end, press the
SETUP button three times to exit the menu.
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually (see
page 18).
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 22).
Presetting the Stations Manually
You do not need to preset the stations manually if you
have already set them automatically.
1
Press the SETUP button on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
,
or ,
buttons to select the
I N S T A L L A T I O N
option.
3
Press the ENTER button to select this option.
Result:
The
I N S T A L L A T I O N
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is placed
in front of the
MANUAL SET UP
option.
5
Press the
button to select a
MANUAL SET UP
option.
Result:
The
TV STATION TABLE
menu is displayed.
6
Press the
or
buttons to select a programme number as
required.
7
Press the button to preset the station.
Result:
The
menu is displayed.
MANUAL SET UP
8
Press the
or
buttons to start scanning.
Result:
The frequency band is scanned and the first station
found is displayed.
9
Press the
or
buttons until the cursor is placed in front of the
N A M E
.
The station name is set automatically from the broadcast signal.
10
To change the programme's name, press the
button.
Result:
The first letter of the name flashes.
11
To...
Then...
Select a character
Press the
or
button until the
in the name
required character is displayed
(letters, numbers or "-" character).
Move to the next or
Press the
or
buttons
previous character
respectively.
12
If you...
Then...
Wish to store the
Press the
or
buttons to place the
station displayed
cursor in front of the
M F T
.
Press the
or
buttons to adjust the
picture, if necessary.
Press OK to store the station
Do notwish to
Press the
or
buttons until the
store the station
cursor is placed in front of the
displayed
Press the
or
buttons to go on
scanning the frequency band and display
the next station
Go back to the beginning of Step
13
Repeat this procedure from Step
6
onwards, until all the required
stations have been stored.
14
On completion, press the SETUP button three times to exit the
menu.
I N S T A L L A T I O N
E N T E R
E N D
:S E T U P
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH
: C H 6 0
E N D
:S E T U P
** TV STATION TABLE **
P R
CH
NAME
1
- -
- - - -
2
- -
- - - -
3
- -
- - - -
4
- -
- - - -
5
S E T :
S O R T
:E N T E R
D E L E T E
:C L E A R
S E T U P
* * MANUAL SET UP * *
P R
:
1
C H
: - -
M F T
:
-
N A M E
: BBC1
M E M O R Y
:E N T E R
E N D:
S E T U P
C H
.
12
21
GB
Hide quick links:
Advertisement
Table of Contents
