Using The Videoplus Feature; (Dvd-V6000/Dvd-V6500) - Samsung DVD-V6000 User Manual

Using the VideoPlus Feature

(DVD-V6000/DVD-V6500)

Before presetting your DVD-VCR:
• Switch on both the television and your DVD-VCR
• Check that the date and time are correct
• Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1 Press the MENU button, then press the ... or †
button to select PROG, then press the OK or √
button.
The Timer Method menu is displayed.
SETUP Standard
VideoPlus
DVD
VCR
PROG
FUNC
OK
2 Press the ... or † button to select VideoPlus, then
press the OK or √ button.
Standard
SETUP
VideoPlus
DVD
VCR
PROG
FUNC
OK
• It can be displayed simply by pressing the
TIMER button on the remote control.
The Clock Settings menu will appear if the
time was not set on the first run.
Note
Timer Method
√ √
√ √
RETURN MENU
Timer Method
√ √
√ √
RETURN MENU
3
A message is displayed to allow you to enter the
VideoPlus code.
SETUP
DVD
Code - - - - - - - - -
Code
VCR
Correct
PROG
FUNC
OK
• If all six programmes have been set, the message
Timer is full is displayed. Refer to page 36 if you
wish to cancel a preset recording.
4
Press the number buttons to enter the code
opposite the programme that you wish to record in
your television magazine.
• If you wish to correct the VideoPlus code that
you are entering:
- Press the œ button until the number to be
corrected is cleared.
- Enter the correct number.
5
Press the OK button.
The information concerning the programme is
displayed.
PR Day Start
01 SA 01 13 : 25 19 : 57
:
:
:
:
:
:
OK
• When using the VideoPlus function for the first
time with stored stations, the programme
number flashes. This one time, you must enter
the station number manually by pressing the
... or † button.
For more details, please refer to page 32.
VideoPlus
: 0–9
: œ œ
RETURN MENU
Stop Speed V/P
SP Off
:
:
:
:
:
:
RETURN MENU
English - 31