Using The Videoplus+ Feature; Modifying Videoplus+ Programming - Samsung SV-DVD3 Instruction Manual

VCR

Using the VIDEOPLUS+ Feature

GB
Before presetting your DVD-VCR:
SETUP
/ENTER
RETURN TITLE SUBTITLE MARK
Up to six programmes can be preset.
A.DUB SPEED TIMER INDEX
1
1
TIMER METHOD
STANDARD
VIDEOPLUS
2
RETURN ENTER
$ ❷
VIDEOPLUS
3
CODE ---------
CODE:0-9 CORRECT: ➛
RETURN ENTER
4
1/JAN TUE 12:09
PR DAY START STOP V/P
-- ---- --:-- --:---- - 5
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
6
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
SET: ❿
$ ❷
RETURN DELETE:CLEAR
STANDBY/ON OPEN/CLOSE
2 3
5
AUDIO TV/VCR
SHUTTLE
™ VIDEOPLUS+ is a trademark of Gemstar Development Corporation. The VIDEOPLUS+
4 5 6
M O D E /
CLOCK/
system is manufactured under licence from Gemstar Development Corporation.
REPEAT COUNTER
7 8 9
32
Switch on both the television and your DVD-VCR
Check that the date and time are correct
Insert the cassette on which the programme is to be
recorded (safety tab intact)
To enter a VideoPlus, press the TIMER button.
Press the and ENTER buttons to select VIDEOPLUS .
❷!
Result: A message is displayed to allow you to enter the
VIDEOPLUS+ code.
If all six programmes have been set, the message TIMER
IS FULL is displayed. Refer to page 35 if you wish to
cancel a preset recording.
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
If you wish to correct the VIDEOPLUS+ code that you are
entering:
Press the ➛ button until the digit to be corrected is
cleared
Enter the correct digit
Press the SETUP button.
Result: The information concerning the programme is displayed.
When using the VIDEOPLUS+ function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the or buttons. Refer to the following page if:
$ ❷
The programme number or times flash
You wish to modify the programme
If the programme and times are correct, press the RETURN button.
Press the STANDBY/ON button to activate the timer.
Refer to page 35 if you wish to:
Check that your DVD-VCR has been programmed correctly
Cancel a preset recording
The numbers next to each TV programme listing are
VIDEOPlus+ code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the VIDEOPLUS+ code for the programme
you wish to record.

Modifying VIDEOPLUS+ Programming

If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press SETUP a second time to confirm.
If you wish to... Then...
Select an input source other Press the ➛ or ❿ buttons, until the
than the tuner (AV1, AV2 or AUX) Press the INPUT SEL. button one or more times to change the
input source selection.
Result:
The input source must be selected before changing any
other value.
Press the ➛ or ❿ buttons, until the
Record a programme every day
(Monday to Sunday) at the same time Press the
displayed.
Press the ➛ or ❿ buttons, until the
Record a programme every week
on the same day and at the same time Press the
displayed, followed by the required day.
Example:
Press the ➛ or ❿ buttons, until the
Extend the recording time
Press the
time.
Press the ➛ or ❿ buttons, until the recording speed selection
Select the recording speed
flashes.
Press the
displayed:
• AUTO
• SP (Standard Play)
• LP (Long Play)
Select the PDC recording Press the ➛ or ❿ buttons, until the V/P selection flashes.
Press the
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC ON
(by selecting "ON" in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won't take place.
VCR
selection flashes.
PR
The programme number is replaced by:
•
The AV1, AV2 or AUX source using the INPUT
SEL. button for a satellite tuner or external video
source
DAY selection flashes.
or buttons, until the DLY (Daily) value is
$ ❷
DAY selection flashes.
or buttons, until the W- (Week) value is
$ ❷
W-SA (Weekly Saturday)
STOP selection flashes.
or buttons to increase or decrease the stop
$ ❷
or buttons until the correct indication is
$ ❷
(Auto Tape Speed Select) : see page 34
or buttons until the "ON" indication is displayed.
$ ❷
33
GB