Presetting The Stations Automatically; Presetting The Stations Manually - Samsung DVD-CM350 Instruction Manual

VCR

Presetting the Stations Automatically

GB
☛
MAIN MENU
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
INSTALLATION
be done:
➛¤¤¤❿
RETURN œ❷¤¤ ENTER
You can store up to 80 stations.
INSTALLATION
1
AUTO SET UP
MANUAL SET UP
2
TV SYSTEM :K
VCR OUTPUT CH :CH36
3
œ ❷¤¤¤¤¤¤¤
RETURN ENTER
4
YOUR DATA WILL BE LOST
5
PRESS ENTER TO CONTINUE
RETURN TO EXIT
6
7
AUTO SET UP
PLEASE WAIT
2%
I--------------------I
RETURN
8
➢
20
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
N Automatically
N Manually (see page 21)
Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
Press the corresponding œ , ❷
INSTALLATION option.
Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
Press the corresponding œ or ❷ buttons, until the AUTO SET UP
option is selected. And then press the ENTER button to select this
option.
Result: The country selection MENU is displayed.
Press the œ or ❷ buttons to select your country.
☛
The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
Press ENTER button.
Result: A message appears, indicating that any channels
already preset on your VCR will be deleted.
Press ENTER to start the auto scanning.
Result: N The PLEASE WAIT indication flashes on the
television screen.
N The first frequency band is scanned and the first
station found is displayed and stored.
N
The DVD-VCR then searches for the second station
and so on.
N When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
If you wish to cancel the auto scanning before the end, press the
RETURN button three times to exit the menu.
N Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 22).

Presetting the Stations Manually

☛
You do not need to preset the stations manually if you
have already set them automatically.
1
Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding œ , ❷
INSTALLATION option.
3
Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the MANUAL SET
UP option is selected.
5
Press the ENTER button to select a MANUAL SET UP option.
Result: The TV STATION TABLE menu is displayed.
6
Press the œ or ❷ buttons to select a programme number as
required.
Press the ❿ button to preset the station.
7
Result: The MANUAL TUNING menu is displayed.
Press the ➛ or ❿ buttons to start scanning.
8
Result: The frequency band is scanned and the first station
found is displayed.
9 Press the button, until the DECODER is selected.
❷
Press the ❿ button to activate or deactivate use of the decoder
10
for the TV station, if necessary.
11
Press the œ or ❷ buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
To change the programme's name, press the ❿¤button.
12
Result: The first letter of the name flashes.
13
To... Then...
Select a character Press the or button until the
œ ❷
in the name required character is displayed
(letters, numbers or "-" character).
Press the ❿ or ➛ buttons
Move to the next or
previous character respectively.
14
If you... Then...
Wish to store the N Press the œ or ❷¤ buttons until the
station displayed is selected.
Press the ➛ or ❿ buttons to adjust the
N
picture, if necessary.
N Press ENTER to store the station
N
Do not wish to Press the œ or ❷ buttons until the
store the station is selected.
Press the ➛ or ❿ buttons to go on
displayed N
scanning the frequency band and display
the next station
N Go back to the beginning of Step
15 6
Repeat this procedure from Step onwards, until all the required
stations have been stored.
16 On completion, press the RETURN button three times to exit the
menu.
VCR
GB
MAIN MENU
INSTALLATION
➛¤¤¤❿
RETURN œ❷¤¤ ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
RETURN œ ❷¤¤¤¤¤¤¤ ENTER
TV STATION TABLE
PR CH NAME DEC
1
2
3
4
5
❿¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
œ ❷ SWAPPING:ENTER
RETURN DELETE:CLEAR
MANUAL TUNING
PR : 1
MFT
CH : ---
MFT : -
DECODER : OFF
NAME : ----
➛ ❿¤¤¤
œ ❷¤¤¤ MEMORY:ENTER
RETURN
CH
14
21