Intelligent Picture Control; Auto Power Off; Showview Extend - Samsung DVD-CM350 Instruction Manual

VCR

Intelligent Picture Control

GB
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
MAIN MENU
2
3
USER SET
➛¤¤¤❿
RETURN ENTER
œ❷¤¤
4
5
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
6
ON
IPC :ON

AUTO POWER OFF

:OFF
OFF
SHOWVIEW EXTEND :OFF
7
AUX AUDIO :RCA
➛¤❿
RETURN œ ❷¤
8
VCR
Auto Power Off
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
MAIN MENU
1
USER SET 2
➛¤¤¤❿
RETURN œ❷¤¤ ENTER
3
4
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
OFF 5
AUTO POWER OFF :OFF
2HOUR
SHOWVIEW EXTEND :OFF
3HOUR
AUX AUDIO :RCA
➛¤❿
RETURN œ ❷¤¤
6
26
During playback, press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
Press the corresponding œ , ❷¤
USER SET option.
Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
Press the corresponding œ or ❷ buttons, until the IPC option is
selected.
Press the ❿¤button to select the IPC (intelligent picture control)
option.
➢
When intelligent picture control mode is ON , the sharpness
of the image is adjusted automatically.
To adjust the sharpness manually, press the
❷ button to turn the
IPC mode OFF .
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
➢
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
On completion, press the RETURN button again.
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
Press the corresponding œ , ❷
USER SET option.
Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
Press the corresponding œ or ❷ buttons, until the AUTO POWER
OFF option is selected.
Press the ❿ button, until you select the time of Auto Power off
interval.
OFF 2HOUR 3HOUR
On completion, press RETURN twice to exit the menu.

ShowView EXTEND

To prevent delays or over-runs the VCR has a function called
ShowView EXTEND allowing you to extend the recording time by
up to 60 minutes.
➢
Only use if PDC is not available or set to OFF.
1
Press the SETUP button on the remote control.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
œ ❷
USER SET option.
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the
SHOWVIEW EXTEND option is selected.
Press ➛ or ❿ buttons to set the ShowView EXTEND time by
5
increments of 10 minutes.
To turn off, press ➛ or ❿ buttons repeatedly until
6 OFF shows.
VCR
GB
MAIN MENU
USER SET
➛¤¤¤❿
RETURN ENTER
œ❷¤¤
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
OFF
AUTO POWER OFF :OFF
SHOWVIEW EXTEND :OFF 10
AUX AUDIO :RCA
60
➛¤❿¤¤¤
œ ❷
RETURN
27