VCR
Using the Timer Programming Feature
GB
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛
TIMER METHOD
STANDARD
SHOWVIEW
1
RETURN
❷
ENTER
2
3
1/JAN TUE
12:09
4
PR DAY
START STOP V/P
1 SA 9 12:00 12:50SP -
-- ---- --:-- --:---- -
5
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
6
-- ---- --:-- --:---- -
➛❿
❿
SET:
❷
7
RETURN
DELETE:CLEAR
8
9
10
11
12
13
14
15
16
17
➢
34
Before presetting a recording, check that the date and
time are correct.
Insert the cassette and press TIMER on the remote control.
Result:
The timer selection is displayed.
Press the ENTER button to select
STANDARD
option.
Result:
The
TIMER PROGRAMMING
menu is displayed.
Press ❿¤¤to select the input source.
Select the required station by pressing the
,
buttons or
❷
INPUT to select the AV1, AV2 input sources.
Press ❿ to select the recording day.
Select the required day by pressing the
or
❷
buttons.
Press ❿ to select the recording start time.
Select the required hour value by pressing the
or
❷
buttons.
Press ❿ to select the minutes.
Select the required minute value by pressing the
or
buttons.
❷
Press ❿ to select the recording end time.
Select the required recording end time by pressing the
or
❷
buttons, following the same procedure as when selecting the
recording start time.
Press ❿ to select the recording speed.
Press the
or
❷
buttons to select the
SP
(Standard Play),
(Long Play),
AUTO
(Auto Tape Speed Select) recording speeds.
Press the
or
buttons to toggle between the VPS or PDC
❷
mode (marked
ON
) and the non-VPS/PDC mode (marked
-
).
When you have finished, press the RETURN button.
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
Checking a Preset Recording
You can check your preset recordings:
N When you have finished presetting the DVD-VCR
N If you have forgotten which programmes will be
recorded
1
Press TIMER on the remote control.
Result:
The timer selection is displayed.
2
Press the ENTER button to select
STANDARD
Result:
The
TIMER PROGRAMMING
3
Press the
or
❷
buttons to select the required programme.
Press the ➛ or ❿ buttons to select and change any values as
4
required. For more details, refer to the previous page.
5
On completion, press RETURN twice.
Cancelling a Preset Programme
You can cancel any programmes that are:
N Incorrect
LP
N No longer required
1
Press TIMER on the remote control.
Result:
The timer selection is displayed.
2
Press the ENTER button to select
STANDARD
Result:
The
TIMER PROGRAMMING
3
Select the programme to be cancelled by pressing the
buttons.
4
Press the CLEAR button to cancel the selected programme.
Result:
All the recording information is deleted and the broad-
cast will not be recorded.
5
On completion, press RETURN twice.
VCR
1/JAN TUE
12:09
PR DAY
START STOP V/P
1 SA 9 12:00 12:50SP -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
option.
➛❿
❷
menu is displayed.
RETURN
DELETE:CLEAR
VCR
1/JAN TUE
12:09
PR DAY
START STOP V/P
1 SA 9 12:00 12:50SP -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
option.
-- ---- --:-- --:---- -
menu is displayed.
➛❿
❷
RETURN
DELETE:CLEAR
or
❷
4
35
GB