Samsung DVD-CM350 Instruction Manual page 38

SOUND mode/effect function
GB
This feature simulates the sound of different acoustic spaces.
1
1
2
2
Dolby Pro Logic II
ON OFF
Mode
PL II STEREO
Source
G G L L
Video Tape
G G L L
TV, FM/AM
G G L L
AUX
OPTICAL
G G L L
(PCM)
➢
N The Sound mode and effects do not Work With Dolby Digital, DTS, VCD, MP3, LPCM
disc, and Optical Input(OPTICAL) sources.
N Dolby Digital, DTS, Optical Input (Dolby Digital) : 5.1-Channel speaker output
N VCD, MP3, LPCM, Optical Input (PCM) : Outputs to the front left, right, and subwoofer
speakers only.
N During DTS or MPEG playback, audio is output only to the speakers.
Audio is not output using other connections.
72
Press the SOUND MODE button.
PL II
• Each time you press the button,
the sound mode changes as NATURAL
follows.
JAZZ
• The SOUND mode adds a coustic
surround effect during playback of
stereo analog or linear PCM digital
CONCERT
signals.
STADIUM
Press the SOUND EFFECT button.
• Each time you press the button, the selection alternates between
EFFECT 1 and EFFECT 2.
• The higher the number, the greater the effect.
• If you press the button while in the STEREO mode, the selection
alternates between STEREO snd 4 Stereo.
G G
: 5.1ch
L L
: STEREO
NATURAL JAZZ CONCERT STADIUM
G G G G G G G G
G G G G G G G G
G G G G G G G G
G G G G G G G G
Listening to radio broadcasts
You can automatically or manually tune in to FM and AM stations
to listen to radio broadcasts.
1 Press the FM/AM button.
• Each time you press the button, the band alternates between
FM and AM.
2
Tune in to a station.
• Automatic tuning : Hold down l➛➛ / ❿ ❿l to begin the
automatic tuning.
• Manual tuning : Press l➛➛ to tune in to a lower frequency, or
press ❿ ❿l to tune in to a higher frequency.
➢
The FM/AM function cannot be selected while operating the
DVD player or VCR.
Presetting stations
Example: Storing an FM station of 89.1 MHz into the preset number
02 of the FM1 band
1 Press the FM/AM button to select the FM band.
• Each time you press the button, the band alternates between
FM and AM.
2 Select a channel to choose the memory address to which you want
to store the station.
Use the ➛➛ and ❿ ❿ buttons to tune in to 89.1 FM.
3
Press the I button or the ENTER button on the remote control.
4
• 89.1 FM is stored in FM1.
5
Select a channel to select a preset station number.
Press the I STOP button or ENTER button again to store FM
6
station 89.1 to FM 1.
7
To store other stations Repeat steps 1 to 6 above.
• You can use the CHANNEL button to store up to 20 FM stations
and 10 AM stations.
➢
• will be indicated when tuned to an FM station.
• To store other channels, repeat the steps 2 to 4 above.
GB
1
2
2
2
1
3
3
4
73