Selecting The Rf Out Sound Mode (B/G-D/K); Setting The Dvd-Vcr Output Channel; Selecting The Colour Mode; Nicam - Samsung DVD-CM350 Instruction Manual

VCR

Selecting the RF OUT Sound Mode (B/G-D/K)

GB
You can choose the sound mode (B/G or D/K) according to the TV
MAIN MENU
set connected to your VCR.
1
INSTALLATION
➛¤¤¤❿
RETURN ENTER 2
œ❷¤¤
3
INSTALLATION
AUTO SET UP
4
MANUAL SET UP
K
TV SYSTEM :K
G
VCR OUTPUT CH :CH36
5
➛¤❿
RETURN œ ❷¤¤
6
INSTALLATION
AUTO SET UP
MANUAL SET UP
G
TV SYSTEM :G
K
VCR OUTPUT CH :CH36
➛¤❿
œ ❷¤¤
RETURN
Only Turkey
VCR

Setting the DVD-VCR Output Channel

Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
MAIN MENU frequency in which information is displayed on the screen.
1
INSTALLATION
2
➛¤¤¤❿
RETURN œ❷¤¤ ENTER
3
INSTALLATION
4
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
CH21
5
VCR OUTPUT CH :CH36
CH36
➛¤❿¤¤
RETURN œ ❷ CH69
6
24
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
Press the corresponding œ , ❷
option.
INSTALLATION
Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
Press the œ or ❷ buttons, until the TV SYSTEM option is
selected.
Press the ➛ or ❿ button to select G or K.
On completion, press RETURN to exit the menu.
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
Press the corresponding œ , ❷
INSTALLATION option.
Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
Press the œ or ❷ buttons, until the VCR OUTPUT CH option is
selected.
Select the required output channel (CH21~CH69) by pressing the
➛ or ❿ buttons.
On completion, press RETURN to exit the menu.
Then tune your television again (see page 14).

Selecting the Colour Mode

Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
➢
N
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
N
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
œ ❷
option.
USER SET
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the
œ ❷ COLOUR
option is selected.
SYSTEM
Press the ❿ button to select ➝ ➝
5
AUTO PAL MESECAM
B/W .
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6
On completion, press RETURN twice to exit the menu.

NICAM

NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 37.
1
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
œ ❷
USER SET option.
3
Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the NICAM
is selected.
Press ➛ or ❿, until...
5
To...
Mono mode OFF is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode ON is displayed.
ON: Normally set at this position.
6 On completion, press RETURN twice to exit the menu.
VCR
GB
MAIN MENU
USER SET
➛¤¤¤❿
RETURN ENTER
œ❷¤¤
USER SET
AUTO
COLOUR SYSTEM :AUTO
PAL
NICAM :ON
MESECAM
IPC :ON
B/W
AUTO POWER OFF :OFF
SHOWVIEW EXTEND :OFF
AUX AUDIO :RCA
➝ ➛¤❿
RETURN œ ❷¤¤
VCR
MAIN MENU
USER SET
➛¤¤¤❿
RETURN ENTER
œ❷¤¤
option
USER SET
COLOUR SYSTEM :AUTO
ON
NICAM :ON
OFF
IPC :ON
AUTO POWER OFF :OFF
SHOWVIEW EXTEND :OFF
AUX AUDIO :RCA
➛¤❿
œ ❷¤¤
RETURN
25