Case 3 : Component Video Output Jacks - Samsung DVD-R145 Instruction Manual

Case 2 : Connecting to an
S-Video output jack
1. Connect an S-Video cable (not included) between the
S-VIDEO OUT jack on DVD Recorder and S-VIDEO
INPUT jack on your TV (or AV amplifier).
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on DVD Recorder and AUDIO IN
jacks on TV (or AV amplifier).
You will enjoy high quality images.
●
Case 3 : Component Video
output jacks
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,P
DVD Recorder and COMPONENT IN(Y,P
on your TV.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See pages 20-21).
3. After connecting, refer to the page 34 to 35.
You will enjoy high quality and accurate colour
●
reproduction images.
green
blue
red
The Component jacks will not output
■
video resolutions above 576p.
NOTE
To view 720p and 1080i connect the DVD
Recorder to your TV with the supplied
HDMI cable.
With HDMI connected, press the P.SCAN
button to alternate between all available
resolutions.
(See page 37)
Make sure that the colour coded
■
connections match. The Y, P
component output jacks of your DVD
Recorder must be connected to the exact
corresponding component input jacks on
your TV.
Progressive setting is only available when
■
the Video Out is set to Component.
(See page 34)
,P ) jacks on
B R
,P ) jacks
B R
, P
B R
19
English -