Output Selection; Divx(R) Registration; Setting Up The Parental Control - Samsung DVD-R145 Instruction Manual

Hide thumbs Also See for DVD-R145:
Table of Contents

Advertisement

HDMI/DVI Resolution
This setting is used when the DVD Recorder is connected
by HDMI or DVI with Display devices (TV, projector, etc).
DVD-Recorder
No Disc
Programme
TV Aspect
Setup
3D Noise Reduction : Off
Video Output
HDMI/DVI Resolution

DivX(R) Registration

MOVE
OK
576p : 720 x 576
720p : 1280 x 720
1080i : 1920 x 1080

Output Selection

• Connect the DVD Recorder to your TV via HDMI or DVI
cable. And set your TV's input to HDMI.
• Press the P.SCAN button while the unit is in Stop mode
to select the HDMI output resolution as follows:
→576p → 720p → 1080i.
Progressive scan automatically activates
when HDMI is connected.
NOTE
There will be no HDMI video and audio
outputs unless progressive scan function
is activated.
Consult your TV User's Manual to find out
if your TV supports Progressive Scan.
If Progressive Scan is supported, follow
the TV User's Manual regarding
Progressive Scan settings in the TV's
menu system.
If Video Output is set incorrectly, the
screen may be blocked.
The resolutions available for HDMI/DVI
output depend on the connected TV or
projector. For details, see the user's
manual of your TV or projector.
When the resolution is changed it may
take a few seconds for a normal image to
appear.
If you set the HDMI output resolution
720p or 1080i, HDMI output provides
better picture quality.
DivX playback screen output can only be
done in 576p.
Video
: 16:9 Wide
√ √
√ √
: Component
√ √
576p
√ √
720p
√ √
1080i
RETURN
EXIT

DivX(R) Registration

Please use the Registration code to register this DVD
Recorder with the DivX(R) Video On Demand format.
For more information, visit www.divx.com/vod
Setting up the Parental
Control
The Parental Control function works in conjunction with
DVDs that have been assigned a rating which helps
you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
1
With the DVD Recorder in Stop mode/No
Disc mode, press the MENU button.
DVD-Recorder
No Disc
Programme
Scheduled Record List
Setup
MOVE
OK
Press the ...† buttons to select Setup, then
2
press the OK or √ button.
DVD-Recorder
No Disc
Programme
System
Setup
Clock Set
Language
Audio
Video
Parental Control
Install
MOVE
OK
Programme
√ √
RETURN
EXIT
Setup
√ √
√ √
√ √
√ √
√ √
√ √
√ √
RETURN
EXIT
English -
37

Advertisement

Table of Contents
loading

Table of Contents