Output Selection - Samsung DVD-SH873M User Manual

system setup
In Component mode, you can set video output to Progressive or Interlace, see page 45.
When the HDMI cable (not supplied) is not connected, available video output jacks are as follow.
Available Video Output Jack
Output jack
Component Output (Y, P
AV1 Scart
Composite Video out
M 
When the HDMI cable(not supplied) is connected, RGB output does not operate. Video output is set to Component.
HDMI Resolution
This setting is used when the unit is connected by HDMI with Display
devices (TV, projector, etc).
•
576P : 720 x 576
•
720P : 1280 x 720
•
1080i : 1920 x 1080
•
1080P : 1920 x 1080

Output selection

•
Connect the HDD & DVD Recorder to your TV via HDMI.
Set your TV's input to HDMI.

M
Progressive scan automatically activates when HDMI is connected.

Consult your TV User's Manual to fi nd out if your TV supports Progressive Scan. If Progressive Scan is supported,
follow the TV User's Manual regarding Progressive Scan settings in the TV's menu system.

If Video Output is set incorrectly, the screen may be blocked.

The resolutions available for HDMI output depend on the connected TV or projector. For details, see the user's
manual of your TV or projector.

When the resolution is changed it may take a few seconds for a normal image to appear.
44_ system setup
Setting mode
, P )
B R
R, G, B
Composite
Component mode
O
X
O
O
HDD & DVD RECORDER
HDD
Timer Record
Disc Manager
RGB MODE
X
O
X
O
Library
TV Aspect : 16:9 Wide
3D Noise Reduction : Off
Guide
Video Output : Component
Channel
HDMI Resolution : 576p
576p
720p
Component output : Interlace
1080i
1080p
Setup
m MOVE sSELECT rRETURN
Video
►
►
►
✔
►
►
eEXIT