History - Thirty-Day Graphic - Victron energy Isolated SmartSolar MPPT RS 450/100 Manual

Isolated SmartSolar MPPT RS
Is my battery being charged?
The battery will be charged whenever the power available from the PV panels exceeds the power being drawn by the loads
(lights, fridge, inverter, etc.).
You can only tell if that is the case with Charge Controllers which have all loads connected to the load output terminals.
Remember: any loads connected directly to the battery can't be monitored by the Solar Charger.

4.3. HISTORY - Thirty-day Graphic

(The fragmented square icon (top left) allows you to toggle between 'portrait' and 'landscape' screen presentations.)
A summary of activity for the last 30 days is presented graphically. Swipe the bar left or right to show any of the previous 30 days.
The daily log shows:
• Yield: The energy converted for that day.
• P max: The maximum power recorded during the day.
• V max: The highest voltage from the PV array during the day.
Clicking on any day/bar in the graph will expand the information to show charge-status times - both as hrs/m; and also as a
percentage of the 'charge' day. This graphic provides an at-a-glance representation of how much time your charger is spending in
each of three modes: Bulk / Absorption / Float.
Tip! You can use the charge times to see if the PV array is properly sized for your requirements. A system which never reaches
'Float' may need more panels; or perhaps the load could be reduced?
Page 18 Operation