Würth Video-scope PRO Manual page 15

Setting Time Display:
1. Press OK.
2. Press ▲ or ▼ to move to Date/Time command.
3. Press OK.
4. Press ▲ or ▼ for "Display" option.
5. Press to switch the "Display" function between ON/
OFF.
Image Status: Press
OFF.
6. Press OK to complete the set up.
7. Press ESC to return to Preview mode.
Viewing on a TV monitor
1. Plug the included AV cord into the TV out socket located
on the right side of the console.
Note: Please plug the other end of the AV cord into the
"AV in" socket on the external monitor.
2. Press OK.
3. Press ▲ or ▼ to move to "Video output" option.
4. Press OK.
Image Status: image/video will be transmitted to the
external monitor.
Setting video format:
1. Press OK.
2. Press ▲ or ▼ to move to "Video Format" option.
3. Press OK.
4. Press ▲ or ▼ to select NTSC or PAL.
5. Press OK.
Deleting a specific photo (Browse mode only):
1. Enter Browse mode, then press ▲ or ▼ to locate the photo
or video you wish to delete.
2. Press OK.
Image Status: "Delete yes or no" options
3. To select your option, press ▲ or ▼ .
Image Status: The selected option flashes.
4. Press OK to execute your selected option or press ESC to
cancel.
Deleting all photos:
1. Press OK during Preview mode.
Image Status: Showing the Main Manual.
2. Press ▲ or ▼ for "Delete All" command.
3. Press OK.
Image Status: "yes" or "no" option appears
4. Use ▲ or ▼ to select "yes".
5. Press OK to execute.
once for ON, press again for
NO DISPLAY
MENu
DELETE ALL
VIDEO OUTPUT
DATE/TIME SETUP
LANGUAGE
VIDEO FORMAT
AUTO POwER OFF
MENu
DELETE ALL
VIDEO OUTPUT
DATE/TIME SETUP
LANGUAGE
VIDEO FORMAT
AUTO POwER OFF
DISPLAY
tV OutPut
NTSC
PAL
DELETE
YES NO
ERASE ALL
YES NO
15