Scanning And Attaching An Image To An Email - Epson SC-T3100M Series User Manual

SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
F
Press the Save button to start scanning.
While scanning, hold the original with both
hands so that it does not skew.
G
Remove the original when scanning is complete.
While holding the original, press the OK
button on the screen, and then remove the
original.
Scanning and Attaching an
Image to an Email
A
Load the original.
"Placing Documents in the Scanner" on
U
page 101
"How to Load Documents" on page 103
U
B
Touch Scan on the Home screen.
C
Touch Email.
A screen from which you specify a recipient
appears.
D
Specify the recipient using one of the 4
following methods.
❏ Select a recipient that is registered for
frequent use: Touch the icon that is displayed.
Scanning (SC-T3100M Series Only)
E
F
G
107
❏ Keyboard: Touch Keyboard and enter a
recipient. Touch OK.
❏ Select from your contacts: Touch Contacts,
select a recipient or group, and then touch
Close.
You can search the recipients from your
contacts. Enter search keywords into the
search box at the top of the screen.
❏ Select from your history: Touch History,
select a recipient, and then touch Close.
Note:
❏ The number of recipient that you have
selected appears on the right side of the
screen. You can send an email to up to 10
recipients (email addresses or groups).
If you include a group in your recipients, you
can also add the addresses in the group and
send an email to up to 200 email addresses.
❏ You can check a list of the selected addresses
by touching the box at the top of the screen.
❏ Touch
to change your email server
settings.
Touch Scan Settings, and then do the settings
for scanning.
Select settings, such as the Color Mode and the
File Format.
"Scanning Menu (SC-T3100M Series
U
Only)" on page 168
If you are using the optional carrier sheet, you
must do the following settings.
❏ Specify the Scan Size from a standard size.
❏ Set Top Offset to 19 mm.
Press the Save button to start scanning.
Remove the original when scanning is complete.
While holding the original, press the OK
button on the screen, and then remove the
original.