Epson SC-T3100M Series User Manual page 100

SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
D
Select 1 file to print.
Printing JPEG files
Touch to select the file image to print, then
touch Proceed to Print.
This will add a check mark to the selected
image. Touch Single View to enlarge the
selected image to confirm. To change the
display order of files, touch
Printing TIFF and PDF files
From the list, touch a file name to select it. To
change the display order of files, touch
Note:
❏ Files other than JPEG, TIFF, or PDF files are
not displayed on the printer screen.
❏ Any characters in the folder or file names
that cannot be displayed by the printer will
be displayed as "?".
E
Select Black/White or Color.
Using advanced settings such as enlarging or
reducing size
Proceed to step 6.
Printing at actual size without advanced
settings
Proceed to step 7.
F
Touch the Advanced tab.
Enlarge/reduce settings can be configured in
Reduce/Enlarge. If you set Auto Fit Page to
On, printing is performed by automatically
enlarging to fit the width of the roll paper or
the size of the cut sheet paper loaded in the
printer.
See the following for more details on other
settings items.
"Memory Device (SC-T3100M Series
U
only)" on page 161
Printing without Using the Printer Driver
.
.
100
Note:
If you touch (Presets), you can assign a name
to frequently used print settings and then register
them to Presets.
The screen for entering a name can be switched
as shown below with the button marked.
Also, each touch of the following bottom left icon
switches the input method as follows.
ABC: Enters alphabet letters.
123#: Enters numbers and symbols.
G
Touch the numeric value for the number of
prints and then enter the number of prints in
the keypad screen.
Note:
You can use the Preview button to check the
print image (JPEG or TIFF only).
H
Touch the Print button.