Wireless Panda Keypad Icons; Assign And Edit Users; Assign Proximity Tag; Registering To The Risco Cloud - Risco WiComm Pro Quick User Manual

Wireless Panda Keypad Icons

Cloud icon
On: System connected to cloud.
Slow Flash: Cloud connectivity
fault.
Off: No cloud connectivity
Fault icon
On: Fault in the system.
Off: System is operating
normally.
Assign and Edit Users (User Codes)
1. Press and enter code.
2. Scroll to Codes/Tags, then press
3. Scroll to Access Codes, then press
4. Scroll to New/Change, then press
5. Scroll to select the index number (to designate
to a system user), then press
6. Enter (or re-enter) the new code.
7. Re-enter the new code; the system beeps and
"Accepted" displays.
8. Repeat the above steps for additional codes.

Registering to the RISCO Cloud

1. Go to www.riscocloud.com
2. Click register.
3. Complete registration form, and then press Register.
Note: Enter the full 15 digits Panel ID (numbers only) printed on the sticker located on the
side of the panel (or as printed on the package of the main panel).
A confirmation email will be sent to the address entered.
4. Open the email received and click the link to activate your registration to the RISCO Cloud.
Set/Alarm icon
On: System set (Part or Full).
Rapid Flash: Alarm.
Slow Flash: System in Exit /
Enty Delay.
Off: Unset
Tamper icon
On: Tamper in the system.
Off: No tamper in the system.

Assign Proximity Tag

1. Press
. 2. Scroll to Codes/Tags, then press
. 3. Scroll to Proximity Tags, then press
. 4. Scroll to New/Change, then press
5. Scroll to select the index number (to
designate to a proximity tag user), then
.
press
6. Within 10 seconds, hold the proximity tag
at 1–2 cm from the keypad's top right
corner; a long beep indicates the tag has
been registered.
NOTE: If the tag was already registered, 3
beeps will sound, and a message will
display.
Page 6
Ready icon
On: System ready.
Off: Open zones.
Slow Flash: Ready to set
with open entry/exit zone.
Stay icon
On: System part set or omit
zones.
Off: No omit zones.
and enter code.
.
.
.
.