Canon LBP253 SM Manual page 155

Item
DisCTCHKDSP play/adj/set
range
Default value
TNRB-SW
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Default value
SCALL-SW
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Default value
SCALLCMP
Title
Details
Use case
Adj/set/operate method
Caution
Display/adj/set range
Default value
PS-MODE
Title
Details
Use case
Adj/set/operate method
COPIER > OPTION > USER
0 to 1
0 : OFF
1 : ON
1
ON/OFF of toner replacement counter display
To set whether to display the toner replacement counter on the Counter Check screen. When 1 is set,
the user can check the toner replacement counter.
Upon user's request
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
0 to 3
<Cartridge model>
0 : Hide the Toner Cartridge replacement counter
1 : Display the Toner Cartridge replacement counter (No. 19x)
2 : Not used (same as the setting value of 0)
3 : Not used (same as the setting value of 0)
<Toner supply model>
0 : Hide the Toner Bottle / Unidentified Toner Bottle replacement counter
1 : Display the Toner Bottle replacement counter (No. 07x)
2 : Not used (same as the setting value of 1)
3 : Display the Toner Bottle / Unidentified Toner Bottle replacement counter (No. 017x/No. 18x)
* TNRB-SW setting is not used with the machines for China.
It is to always display the Toner Bottle / Unidentified Toner Bottle replacement counter (No. 017x/No.
18x) (cannot be hidden)
0
ON/OFF of Service Call button display
To set whether to display or hide the Service Call button on the Panel. When 1 is set, the button is
displayed.
When the sales company supports service initiated by the Service Call button
Enter the setting value, and then press Apply key.
0 to 1
0 : OFF
1 : ON
0
Setting of Service Call complete notice
To set whether to notify the completion of Service Call. With this setting enabled, a notification of repair
completion is sent to UGW to clear the Service Call status that is retained internally.
When service technician uses this mode after completing repair
Enter the setting value, and then press Apply key.
After executing "1: Notified", the setting value becomes 0 immediately.
0 to 1
0 : Not notified
1 : Notified
0
Setting of compatible mode at PS usage
To set for compatibility with existing machine regarding image process or print specification with PS
print. Setting of a value other than the setting values means that multiple settings are combined. (Ex-
ample: 7=1+2+4)
At replacement
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
Description
148
7. Service Mode