Copier - Canon LBP253 SM Manual

3. PSWD-SW: 2
4. Click "Logout" to end the operation.
NOTE:
After login, if you close the browser without "logout", it is recognized that you have been "logged in". Therefore, in order to
log in to service mode again, you must wait for a certain period of time (3 minutes) from the last access to make the system
timeout or turn OFF/ON the power.

COPIER

■ VERSION
Item
VERSION
Title
Details
Adj/set/operate method
Display/adj/set range
Default value
ERR
Title
Details
Adj/set/operate method
JAM
Title
Details
Adj/set/operate method
USER
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
■ ADJUST
Item
ADJ-MFY
Title
COPIER > DISPLAY > VERSION
Version
MAIN: Bootable version
BOOT: BootROM version
LANG: Language pack version
DEMODATA: Demo print data version
ECONT: Printer ROM version
PANEL: Panel microcomputer firmware version
None (display only)
00.00 to 99.99
0
Error code display
Error code display screen
To display the error code and detail code of the system error.
None (display only)
Jam log
To display the jam history.
None (display only)
SPDTYPE:To display the engine speed type (ppm) of Controller Board.
To display the engine speed type (ppm) of Controller Board.
When checking the engine speed type
None (display only)
00 to 99
COPIER > ADJUST > FEED-ADJ
Adjustment of the write start position in the vertical scanning direction when picking up paper from
the Multi-purpose Tray
Description
Description
133
7. Service Mode