Canon LBP253 SM Manual page 148

Item
Default value
Related service mode
SPL93822
Title
Details
Adj/set/operate method
Caution
Display/adj/set range
Default value
Related service mode
SPL78788
Title
Details
Adj/set/operate method
Caution
Display/adj/set range
Default value
Related service mode
SPL00171
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Default value
SPL27354
Title
Adj/set/operate method
Display/adj/set range
Default value
Default value
SPL84194
Title
Adj/set/operate method
Display/adj/set range
Default value
SPL32620
Title
Details
Adj/set/operate method
Display/adj/set range
Default value
SPL60061
Title
COPIER> FUNCTION> SPLMAN
0
COPIER > FUNCTION > SPLMAN > SPL68677
Setting of department ID count all clear
To set whether to disable clearing of all department ID counts.
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
Be sure to perform this mode after consulting with the system administrator at user's site.
0 to 1
0: Disabled
1: Enabled
0
Setting of department ID count clear
To set whether to disable clearing of department ID count.
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
Be sure to perform this mode after consulting with the system administrator at user's site.
0 to 1
0: Disabled
1: Enabled
COPIER > FUNCTION > SPLMAN > SPL93822
To change the maximum auto sleep shift time.
To change the maximum value of auto sleep shift time in Settings/Registration > Timer Settings >
Auto Sleep Time.
When changing the setting time to shift to auto sleep mode
From 0 (Default for Europe) to 60 min From 1 (Default for locations other than Europe) to Maximum
value for each model
1
PC-less update, RMDS environment setting
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
0
0
ON / OFF of E-RDS function
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
0
0
Switching to enable / disable PC-less update
To switch whether to enable the PC-less update function.
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
1
Switching to display the connection destination URL setting of GoogleCloudPrint on the remote UI
Description
141
7. Service Mode