Canon LBP253 SM Manual page 151

Item
Details
Use case
Adj/set/operate method
Caution
Display/adj/set range
Default value
Related service mode
SIZE-LC
Title
Details
Use case
Adj/set/operate method
Caution
Display/adj/set range
Related service mode
MIBCOUNT
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Default value
Related service mode
NS-CMD5
Title
Details
COPIER > OPTION > BODY
To set the location. At installation in areas other than Japan, perform the following procedure to match
the setting information with that of the location.
• At installation
• When changing the location information
1. Enter the setting value under LOCALE, and then press Apply key.
2. Set the paper size configuration under SIZE-LC.
3. Execute COPIER > FUNCTION > CLEAR > ALL.
4. Turn OFF/ON the main power switch.
Since COPIER> FUNCTION> CLEAR> ALL is executed when changing the location, the setting in-
formation of user mode, service mode, etc. is initialized. The setting information of this item is not
initialized.
1 to 8
1 : Japan
2 : North America
3 : Korea
4 : China
5 : Taiwan
6 : Europe
7 : Asia
8 : Oceania
1
COPIER> FUNCTION> CLEAR> ALL
COPIER> OPTION> BODY> SIZE-LC
Setting of paper size configuration
To set the paper size configuration. At installation in areas other than Japan, perform the following
procedure to match the setting information with that of the location.
• At installation
• Upon user's request
1. Set the location under LOCALE.
2. Set the paper size configuration under SIZE-LC, and then press Apply key.
3. Execute COPIER > FUNCTION > CLEAR > ALL.
4. Turn OFF / ON the main power switch.
Since COPIER > FUNCTION > CLEAR > ALL is executed when changing the location, the setting
information of user mode, service mode, etc. is initialized. The setting information of this item is not
initialized.
1 to 4
1 : AB configuration
2 : Inch configuration
3 : A configuration
4 : AB / Inch configuration
COPIER > FUNCTION > CLEAR > ALL COPIER > OPTION > BODY > LOCALE
Setting of MIB collection charge counter
To set the range of charge counter information that can obtain MIB (Management Information Base).
When preventing the Charge Counter MIB from being used by a third party
1. Enter the setting value, and then press Apply key.
2. Turn OFF / ON the main power switch.
0 to 2
0: All charge counters are obtained
1: Only the displayed counter* is obtained
2: All charge counters are not obtained
*: Counter specified by the following: COPIER > OPTION > USER > COUNTER 1 to 6
0
COPIER > OPTION > USER > COUNTER1 to 6
Setting of CRAM-MD5 authentication method at SMTP authentication
Restriction of the use of CRAM-MD5 authentication method at SMTP authentication When 1 is set,
CRAM-MD5 authentication method is not used.
Description
144
7. Service Mode