Table of Contents
Advertisement
6.
If the device is to be returned to the manufacturer for repair, please close the
ports using the transport protection or protect it using equivalent packaging in
order to avoid contamination and damage.
Close the connection bore or threaded connections of the valve installation
7.
surface in order to avoid contamination of the system.
In case of new installation and/or exchange of the safety valve, the following
steps are analog to chapter 7 "Assembly".
12 Disposal
12.1 Environmental protection
Careless disposal of the safety valve and the hydraulic fluid could lead to
environmental pollution.
Thus, dispose of the product and the hydraulic fluid in accordance with the
f
currently applicable national regulations in your country.
Dispose of hydraulic fluid residues according to the applicable safety data sheets
f
for these hydraulic fluids.
Please observe the following information for the environmentally-friendly disposal
f
of the safety valve.
12.2 Return to Bosch Rexroth AG
The hydraulic products manufactured by us can be returned to us for disposal
purposes free of charge. There must be no inappropriate foreign substances or third-
party components when products are returned. Safety valves have to be drained
before being returned. The components have to be sent free to the door to the
following address:
Bosch Rexroth AG
Service Industriehydraulik [Industrial Hydraulics Service]
Bürgermeister-Dr.-Nebel-Straße 8
97816 Lohr am Main
Germany
RE25802-B/09.19, DB(W)...5X/...E, Bosch Rexroth AG
Disposal
45/56
Advertisement
Table of Contents
