Textron GREENLEE LPK1240K Service Manual
Textron GREENLEE LPK1240K Service Manual

Textron GREENLEE LPK1240K Service Manual

Hydraulic crimping tool 12-ton

Advertisement

Quick Links

SERVICE MANUAL
LPK1240K
Hydraulic Crimping Tool
12-ton
Serial Code FYE
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
99932270 REV 2
© 2013 Greenlee Textron Inc.
3/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GREENLEE LPK1240K and is the answer not in the manual?

Questions and answers

Summary of Contents for Textron GREENLEE LPK1240K

  • Page 1 Hydraulic Crimping Tool 12-ton Serial Code FYE Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com 99932270 REV 2 © 2013 Greenlee Textron Inc. 3/13...
  • Page 2: Table Of Contents

    SAE Standard J1273 (Hose and Hose Assemblies): Publication 99930323 All specifications are nominal and may change as design improvements occur. Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its products. Loctite and 242 are registered trademarks of Loctite Corporation.
  • Page 3: Important Safety Information

    Hot sur- faces can cause serious burns. Keep hands away from dies when crimping. Failure to observe this warning could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 4 When disposing of any components (hydraulic hoses, hydraulic fluid, worn parts, etc.), do so in accordance with federal, state, and local laws or ordinances. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 5: Relief Valve Check And Adjustment Procedure

    Screw Seal Nut Adjusting Screw Installing Dies 1. Clean the die seat area. 2. Install the proper size and type of crimping dies. Seal Nut Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 6: Disassembly

    (20) by using low heat to break loose the thread locking compound that holds them together. Remove the handle (26), shims (21), and O-ring (29). Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 7: Assembly

    (6) and secure it to the ram assem- bly (2) using screws (51) with washers (61). Torque to 16.9 newton-meters (150 inch-pounds). Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 8: Illustration

    LPK1240K Hydraulic Crimping Tool Illustration Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 9: Parts List

    Washer, .75 x .50 x .03......1 42865 50428651 Spring, valve plunger ......1 O-ring, .562 x .750 x .093"–68 ....1 41095 50410952 Cap ............1 Retaining ring, .750" ......2 52063245 Spool .............1 Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 10 4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 USA Tel: 800-435-0786 Canada Tel: 800-435-0786 International Tel: +1-815-397-7070 An ISO 9001 Company • Fax: 800-451-2632 Fax: 800-524-2853 Fax: +1-815-397-9247 Greenlee Textron Inc. is a subsidiary of Textron Inc. www.greenlee.com...

Table of Contents