Selectable Lcd Displays; Description Of Watch Functions And How To Use Them; Addition Timer Function - Junghans Anytime Collection Manual

T1
T2

5. Selectable LCD displays

LCD display:
nd
Date – Stopwatch function – 2
Briefly press button T1 once:
Display switches from date to stopwatch function.
Briefly press button T1 once again:
Display switches from the stopwatch function to 2
34
T1 button
Accessing the
– Day and date display adjustment
– Transmitter call
nd
– 2 time
– Stopwatch function (resetting the
stopwatch hand to 0 and exiting the
function)
– Weekday language
T2 button
Setting the
– Time zone
nd
– 2 time
– Weekday language
– Stopwatch function's start/stop
time
nd
time.
Hold down button T1 for > 3 seconds until what is shown in the LCD display
switches to [00]. Then briefly press the T2 button once. The language setting
display now appears.
After 9 seconds, the language display reverts automatically to showing the
date.
If power is low, the LCD display shows the seconds (flashing in alternation with
[Lo]). The second hand stops at the 12 o'clock position. By pressing T1, however,
nd
you can still switch to date or 2

6. Description of watch functions and how to use them

6.1 Addition timer function

Press the T1 button repeatedly until you reach the [C0:00] display. The stop-
watch function is started and paused again by pressing the T2 button. The
stopwatch hand can be paused and started again any number of times. The
split times are added together. While the stopwatch function is active the
leading [C] flashes.
Pressing the T1 button resets the counter to [C0:00]. Please note: The reset
function can only be operated if the stopwatch function has first been paused.
time.
35