Subscribe to Our Youtube Channel
Related Manuals for Junghans Mega MF Multi-Frequenz W 615.94
Summary of Contents for Junghans Mega MF Multi-Frequenz W 615.94
- Page 1 Junghans Mega MF Multi-Frequenz W 615.94 JUNGHANS UHREN GmbH · Postfach 100 · D-78701 Schramberg www.junghans.de...
-
Page 2: Table Of Contents
Contents Page E N G L I S H Radio technology – The most up-to-date way to keep time Usable time signal transmitters Readiness for use Automatic time synchronisation Functions Selectable LCD displays Description of watch functions and how to use them 6.1 Second time 6.2 Reception display 6.3 Manual time synchronisation (transmitter calls) -
Page 3: Radio Technology - The Most Up-To-Date Way To Keep Time
A watch that in good reception conditions never goes wrong and for Europe never has to be set. The Junghans radio-controlled watch is – WWVB in Fort Collins, Colorado (USA) for North America absolutely precise, as it is linked by radio frequency to the time –... -
Page 4: Readiness For Use
With good reception, the Junghans Mega MF thus always shows 2. Readiness for use the perfectly correct time within any of these four transmission So that your watch is always ready for use, you should make sure areas. Every day at 2am and 3am by the analogue display, the that does not run low on power. -
Page 5: Automatic Time Synchronisation
3. Automatic time synchronisation If all of the attempts at picking up a signal lead to no clear syn- chronisation, the reception display is switched off (see also descrip- Fully automatic time synchronisation takes place daily at 2am and tion of ’Reception Display’ mode in section 6.2). On any such days 3am local time as per the analogue display. -
Page 6: Functions
4. Functions 5. Selectable LCD displays LCD display: Date – 2 time – Language (brief display, then switches to 2 time) T1 – Briefly press once: Display switches from date to 2 time. T1 – Briefly press twice: Display shows language setting After 9 seconds, the language display reverts automatically to showing the 2 time. -
Page 7: Description Of Watch Functions And How To Use Them
6. Description of watch functions and how to use them 6.2 Reception display 6.1 Second time The reception display shows you whether the watch has syn- chronised itself with any of the transmitters. The LCD display has The 2 time function gives you the option to display another time 4 symbols for doing this that indicate the 4 transmitters from in the display that independent of the analogue time (e. -
Page 8: Manual Time Synchronisation (Transmitter Calls)
Should you be in a time zone different from that of the transmitter the watch picked up, then after one-off synchronisation you will Your Junghans Mega MF radio-controlled watch can also be syn- need to set the applicable local time for that location using the chronised manually, by performing what is called a ’Manual trans-... -
Page 9: Time Zone Adjustment
6.5 Set language (day of the week display) The Junghans Mega MF radio-controlled watch can pick up the sig- The language for the day of the week display on your Junghans nals from the DCF77, WWVB, JJY40 and JJY60 transmitters. Within Mega MF radio-controlled watch is set at the factory to German. -
Page 10: Manual Start
6.1. 7.1 Manual start When in manual start mode, your Junghans Mega MF radio- After an unsuccessful restart (at least 30 minutes with no recep- controlled tries every 6 hours to pick up a time signal. As soon as... -
Page 11: General Information
Please have your watch checked regularly. paint thinners). These may harm the surface. Declaration of Conformity Junghans Uhren GmbH herewith declares that this radio-control- led product conforms to the principle requirements and other relevant stipulations of Directive 1999/5/EC. -
Page 12: Technical Information
9. Technical information Time taken to self-set with good reception (DCF) Approx. 3 minutes Time zone adjustment range + 12 hours – 12 hours Switching from CET to CEST and vice versa automatic Time comparison with the time signal transmitters 02:00 and 03:00 hours Operating temperature 0°...
Need help?
Do you have a question about the Mega MF Multi-Frequenz W 615.94 and is the answer not in the manual?
Questions and answers
had battery replaced. watch off 15 minutes and no digital display
The Junghans Mega MF Multi-Frequenz W 615.94 watch may not display time after a battery replacement because manual time synchronization is not possible when battery power is low. The watch requires sufficient power to synchronize with the radio signal. If the battery was recently replaced, it might need time to recover or be installed correctly. If the issue persists, the watch may need to be taken to a specialist retailer or the Junghans Service Centre for further inspection.
This answer is automatically generated
@Mr. Anderson is a service center located in fort Lauderdale fl 33312
@Mr. Anderson