Content Page Radio technology Operational requirements Automatic time synchronisation Functions 4.1. Time display modes 4.2. Additional functions Description of the functions and their operation 5.1. Stopwatch with split function (chrono) 5.2. Countdown timer 5.3. Alarm Reception indicator Manual synchronisation (transmitter call) Time zone adjustment/ 12-24 hour display / home time 8.1.
Please read all of the following information, which explains the general operating principles of radio-controlled watches and the instructions for operating your Junghans Mega 1000, so that you can take advantage all of the functions of your watch. We hope that you will derive much enjoyment from this very special watch.
4. Functions The Junghans Mega 1000 has a variety of functions that are shown in The fully automatic synchronisation of your watch is carried out daily the display. The watch is operated using the five buttons above and...
Time display mode 1: Time display mode 2: Time display mode 3: 4.2. Additional functions Time Time / Day / Date / Time / Day / Date / The following functions can be selected one after the other using the Year Calendar week T3 button.
5. Description of the functions and their operation 5.1. Stopwatch with split function (chrono) Press T3 until CHRONO mode is selected. When the stopwatch is running, pressing T2 The display shows hours, minutes, seconds, shows the split time. These are shown in the tenths of a second and hundredths of a upper part of the display.
5.2. Countdown timer 5.3. Alarm Press T3 until ALARM mode is selected. Press T3 until TIMER mode is selected. The alarm time is set using T1 (set+) and T2 The timer is set using T1 (set+) and T2 (set–). (set–). When the buttons are pressed briefly Press the button briefly to adjust the time by the time changes by the minute, but if the the second.
Your Mega 1000 provides you with the option of setting the alarm as a 6. Reception indicator daily repeating alarm (24h alarm) or as a single alarm. The reception indicator shows whether the watch has been synchroni- Proceed as follows to set the type of alarm: sed with the signals from the transmitter stations.
JJY40 (Japan) Local time Japan Your Junghans Mega 1000 first attempts to receive a signal from the transmitter station it last used to carry out a synchronisation. If the 8. Time zone adjustment/ 12-24 hour display / home time watch cannot receive a signal from this transmitter station then it 8.1.
> 3 sec. 8.2. 12-24 hour display Press T4 until time display is selected (time display mode 1). The display shows the time. Press T4 once the desired time zone has been T4 is used to adjust the time zone. When the set.
Page 12
8.3. Home time 9. Language selection (weekday indicator and date display) The language of the weekday indicator of your Junghans Mega 1000 has been set to German at the factory. The language can be set to Once the desired 12-24 hour time display...
Page 13
9.2. Date display 10. 2 nd Time The 2 nd time function enables you to show an additional time in the display that is independent of the main time (e.g. when you want to The date can be displayed either in day-month see your home time whilst holidaying in another time zone).
If the watch does not successfully receive a sig- 11. Restart / start nal for a long period of time then the reception process is stopped to save battery power. How- The watch is automatically restarted each time ever, the watch still makes an attempt to recei- the battery is changed.
13. Illumination adjusted (hour, minute, second, 12-24 hour display, language, date Your Junghans Mega 1000 is equipped with a display light. Press T5 display mode, year, month and day) flash one after the other in the to activate the light, which stays on for 4 seconds. After 4 seconds the display.
”Lo” for Lock 16. Adjusting the wristband appears in the display. Depending on the model your Junghans Mega 1000 will either be equipped with a leather wristband with buckle or a metal wristband with foldover clasp.
Your watch is equipped with a quality wristband that has been subject to rigorous in-house tests. If you choose to change your wristband, use one of equal quality or ideally an original Junghans wristband. Water resis- x Clean the watch and wristband with a dry or slightly damp, soft tant 3 bar cloth.
Need help?
Do you have a question about the W 604.62 and is the answer not in the manual?
Questions and answers