Factory Default Settings - Tate SmartAire MZ User's Installation Manual

User Installation Manual
®
SmartAire MZ
r1.9-3/11/15

FACTORY DEFAULT SETTINGS

Press and hold the "i" And "°C" Simultaneously for 5 seconds, the unit will enter a factory default reset cycle.
This will reset all parameters, SNMP settings and TCP/IP configurations and restore the unit to its default
settings. The unit will reboot after a 5 second delay upon completing this action
WARNING: FACTORY DEFAULT SETTINGS RESETS SET POINT TO ITS
DEFAULT VALUE OF 76°F, CLOSES, AND REBOOTS AFTER A 5 SECOND DELAY
AVERTISSEMENT: LE RÉGLAGES D'USINE PAR DÉFAUT REINITIALISE LES POINT SET
AU VALEUR DÉFAUT DE 76°F, SE FERME ET REDÉMMARRE APRÈS UN DÉLAI DE 5
SECONDES
7510 Montevideo Road © 2014 Tate Access Floors, Inc.
Jessup, MD 20794
Tel (410)799-4200 25 of 26