Fitting And Removing Suction Hose; Fitting And Removing Hand Tube And Adapter - Stihl SE 133 ME Instruction Manual

Hide thumbs Also See for SE 133 ME:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 32
6 Assembling the wet/dry vacuum cleaner
► Lift off the top part.
2 5
2
1
► Pull the sleeve (1) off the suction connector (2).
► Close the sleeve (1) with the slide (5).
► Tie up disposal bag (3) with the tape (4).
► Remove disposal bag (3) from the container.
► Dispose of the disposal bag (3) in accordance with the
applicable regulations and in an environmentally
responsible manner.
6.4

Fitting and removing suction hose

6.4.1
Attaching the suction hose
2
► Pull off the container cap (1).
► Push sleeve (2) into the suction connector (3) and turn
until it is firmly seated.
0458-660-9621-A
3
4
3
1
6.4.2
Removing the suction hose
3
1
► Pull the sleeve (1) out of the suction connector (2).
► Push container cap (3) into suction connector (2).
6.5

Fitting and removing hand tube and adapter

6.5.1
Fitting the hand tube or adapter
1
► Push hand tube (1) or adapter (3) into the sleeve (2).
The hand tube (1) or adapter (3) engages audibly.
2
2
3
English
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

4786

Table of Contents