Calibration
Model: Cronos LP ____
Date of Calibration: ________________
Reference Power:
(1064nm)
Reference Power:
(10600nm)
1) In Models LP10 and LP5.0 measured values at wavelengths of CO
the specified measurement accuracy.
LaserPoint certifies that, at the time of calibration, the above listed instrument
meets or exceeds all technical specifications defined at page 8 of this Instruction
Manual.
The above listed instrument has been calibrated using standard references
traceable to the National Institute of Standards and Technology (NIST) or
Physikalisch Technische Bundesanstalt (PTB).
This is not a Calibration Certificate for traceability purpose; such a
Calibration Certificate can be quoted on demand.
Important - For Customer Use Only
The reference setting of this instrument can be matched by user to a custom
own reference by means of the instructions reported at Paragraph n.11 of the
Operation Section of this Manual.
LaserPoint s.r.l. – Cronos Instruction Manual – All Rights are Reserved
___________ W
___________ W
Serial Number: ______________
Measured Power: ___________ W
Measured Power: ___________ W
and YAG are the same, within
2
3