Lon Works Interface Module Specifications - IDEC LonWorks FC3A-SX5LS1 User Manual

L W Interface Module Specifications
ON ORKS
Normal Operating Conditions
Operating Ambient Temperature
Storage Temperature
Operating Humidity
Pollution Degree
Corrosion Immunity
Altitude
Vibration Resistance
Shock Resistance
Power Supply (supplied from the OpenNet Controller CPU module)
Dielectric Strength
Insulation Resistance
Current Draw
Grounding
Ground Terminal
Grounding Resistance
Grounding Wire
Weight
Weight
Communication Specifications
Communication System
Transceiver
Transmission Rate
Transmission Distance
(when using Level 4 AWG22 cables)
Maximum Nodes
Network Interface Connector
Network Cable
0 to +55°C (no freezing)
–25 to +70°C (no freezing)
Level RH1 30 to 90% (no condensation)
2 (IEC 60664)
Free from corrosive gases
Operation:
Transportation:
10 to 57 Hz, amplitude 0.075 mm; 57 to 150 Hz, acceleration 9.8 m/sec
10 sweep cycles each in 3 axes (total 80 minutes) (IEC1131)
2
147 m/sec (15G), 11 msec, 3 shocks each in 3 axes (IEC1131)
Between power terminal on CPU module and FG: 500V AC, 1 minute
Between power terminal on CPU module and FG: 10 MΩ (500V DC megger)
Approx. 30 mA
M3 sems
100Ω maximum
UL1015 AWG22, UL1007 AWG18
Approx. 180g
®
LON system
FTT-10A (Free Topology Twisted Pair Transceiver made by Echelon)
78 kbps
Free topology:
Bus topology:
32,385 nodes in a network
In the module:
To the cable:
1-wire connection: 0.2 to 2.5 mm
2-wire connection: 0.2 to 1.5 mm
O N C L W
PEN ET ONTROLLER ON
0 to 2000m
0 to 3000m
Total 500m (400m maximum between nodes)
1,150m (when using FTT-10A transceivers only)
MSTB2.5/2-GF-5.08 (made by Phoenix Contact)
FRONT-MSTB2.5/2-STF-5.08 (made by Phoenix Contact)
2
, AWG24 to 14
2
, AWG24 to 16
I M U
ORKS NTERFACE ODULE SER
L W I
ON ORKS NTERFACE
' M
S ANUAL
M
ODULE
2
(1G);
5