IDEC LonWorks FC3A-SX5LS1 User Manual page 25

L W I
ON ORKS NTERFACE
Structure Name
BIT16_DAT
BIT24_DAT
BIT32_DAT
BIT40_DAT
BIT48_DAT
BIT56_DAT
BIT64_DAT
Example:
When the transmit and receive bytes are set to 3 using
tion Area Settings), only 24-point type declared network variables (nv_i24 and nv_o24) and the network variables shown
in the table below can be used. Then, link registers listed below can be used for transmission and receiving.
b15 b14
L*00
L*01
L*04
L*05
24
M
ODULE
typedef struct {
unsigned char dat[2];
}BIT16_DAT
typedef struct {
unsigned char dat[3];
}BIT24_DAT
typedef struct {
unsigned char dat[4];
}BIT32_DAT
typedef struct {
unsigned char dat[5];
}BIT40_DAT
typedef struct {
unsigned char dat[6];
}BIT48_DAT
typedef struct {
unsigned char dat[7];
}BIT56_DAT
typedef struct {
unsigned char dat[8];
}BIT64_DAT
b13 b12 b11 b10 b9
nv_i8[1]
cannot be used
nv_o8[1]
cannot be used
O N C L
PEN ET ONTROLLER
Structure
WindLDR (on the Open Bus page selected from Configure > Func-
b8 b7 b6 b5
W I M
ON ORKS NTERFACE ODULE
Used For
16-point outputs, 8 bits × 2
24-point outputs, 8 bits × 3
32-point outputs, 8 bits × 4
40-point outputs, 8 bits × 5
48-point outputs, 8 bits × 6
56-point outputs, 8 bits × 7
64-point outputs, 8 bits × 8
b4 b3 b2 b1 b0
nv_i8[0]
nv_i8[2]
nv_o8[0]
nv_o8[2]
U ' M
SER S ANUAL